Miramid® FP20S Datasheet

Polyamide 6

Supplied by BASF Leuna GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Miramid® FP20S is a Polyamide 6 (Nylon 6) material. It is available in Europe for injection molding.

Important attributes of Miramid® FP20S are:
  • Chemical Resistant
  • Impact Resistant
  • Good Mold Release
  • Mold Release Agent

Typical application of Miramid® FP20S: Automotive
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Mold Release
Features 
  • Fuel Resistant
  • Good Flow
  • Good Impact Resistance
  • Good Mold Release
  • Grease Resistant
  • Low Temperature Impact Resistance
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Automotive Applications
Forms 
  • Granules
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Shear Modulus vs. Temperature (ISO 11403-1)
Physical
Dry
Conditioned
Unit
Test Method
Density
--
lb/in³
ISO 1183 2
Water Absorption
      ISO 62 2
Saturation
--
%
 
Equilibrium
--
%
 
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile modulus
psi
ISO 527-2 2
Tensile Stress (Yield)
psi
ISO 527-2 2
Tensile Strain (Yield)
%
ISO 527-2 2
Nominal Tensile Strain at Break
%
ISO 527-2/50
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength
      ISO 179/1eA 2
-22°F
--
ft·lb/in²
 
73°F
 
 
Charpy impact strength
      ISO 179/1eU 2
-22°F
--
 
 
73°F
 
 
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load (264 psi)
--
°F
ISO 75-2 2
Melting Temperature (DSC)
--
°F
ISO 3146
Electrical
Dry
Conditioned
Unit
Test Method
Volume resistivity
--
ohms·in
IEC 60093 2
Dielectric Constant (1 MHz)
--
 
IEC 60250
Dissipation Factor (1 MHz)
--
 
IEC 60250 2
Related Terminology
Dry
This supplier and product may also be known by these terms: PA6
Conditioned
This supplier and product may also be known by these terms: PA6
Generic Name
Dry
Generic Name may also be described by the following terms: PA6.
Conditioned
Generic Name may also be described by the following terms: PA6.
Features
Dry
Features may also be described by the following terms: Good Impact Resistance, Good Flow, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Mold Release, Easy Release, Good Demolding.
Uses
Dry
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Available Documents
Dry
Processing - Injection Molding (English)
Technical Datasheet (English)
Injection
Dry
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.