Home > Plastics > Materials > Lustran® > Lustran® 348 - Datasheet

Lustran® 348 Datasheet

Acrylonitrile Butadiene Styrene

Supplied by INEOS Styrolution Group GmbH

View Complete Data Sheet Search 119000+ Data Sheets
Create Your Free Account or Login
Product Description
Lustran® 348 resin is an injection molding grade of ABS (Acrylonitrile butadiene styrene) with medium-impact and high-gloss.

FEATURES
  • Healthcare certifications
  • High gloss
  • Medium impact
  • Meets FDA modified ISO 10993-1 requirements
  • Meets U.S. Pharmacopeia 23 Class VI test requirements

APPLICATIONS
  • Components of intravenous (IV)systems
  • Surgical instruments
  • Diagnostic test kits
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • High Gloss
  • Medium Impact Resistance
 
Uses 
  • Medical/Healthcare Applications
  • Surgical Instruments
 
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Specific Volume vs Temperature (ISO 11403-2)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR)
    ASTM D1238
220°C/10.0 kg
g/10 min
 
230°C/3.8 kg
g/10 min
 
Molding Shrinkage - Flow
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ASTM D638
Tensile Strength (Yield, 73°F)
psi
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
66 psi, Annealed
°F
 
264 psi, Unannealed
°F
 
264 psi, Annealed
°F
 
Vicat Softening Temperature
°F
ASTM D1525 2
CLTE - Flow
in/in/°F
ASTM D696
Features
Features may also be described by the following terms: High Gloss, Medium Impact Resistance.
Uses
Uses may also be described by the following terms: Medical Applications.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), USP (1).
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h), Loading 1 (10 N)
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.