Product Description | ||||
Polycarbonate 30% Glass Filled , Natural
Textile Machinery Parts |
||||
General | ||||
Material Status
|
|
|||
Availability
|
|
|||
Filler / Reinforcement
|
|
|||
Additive
|
|
|||
Features
|
|
|||
Uses
|
|
|||
RoHS Compliance
|
|
|||
Appearance
|
|
|||
Forms
|
|
|||
Processing Method
|
|
Physical |
Nominal Value
|
Unit
|
Test Method
|
Density / Specific Gravity
|
|
|
ASTM D792 |
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
|
|
g/10 min
|
ASTM D1238 |
Water Absorption
|
ISO 62 | ||
Saturation, 73°F
|
|
%
|
|
Equilibrium, 73°F, 50% RH
|
|
%
|
|
Mechanical |
Nominal Value
|
Unit
|
Test Method
|
Tensile Strength (Break)
|
|
psi
|
ASTM D638 |
Tensile Elongation (Break)
|
|
%
|
ASTM D638 |
Flexural Strength
|
|
psi
|
ASTM D790 |
Impact |
Nominal Value
|
Unit
|
Test Method
|
Notched Izod Impact
|
|
ft·lb/in
|
ASTM D256A |
Thermal |
Nominal Value
|
Unit
|
Test Method
|
Deflection Temperature Under Load
|
ASTM D648 | ||
66 psi, Unannealed
|
|
°F
|
|
264 psi, Unannealed
|
|
°F
|
|
Electrical |
Nominal Value
|
Unit
|
Test Method
|
Volume Resistivity
|
|
ohms·cm
|
ASTM D257 |
Dielectric Strength (0.0787 in)
|
|
V/mil
|
ASTM D149 |
Flammability |
Nominal Value
|
Unit
|
Test Method
|
Flame Rating (0.06 in)
|
|
|
UL 94 |
Features | |||
Features may also be described by the following terms: Good Mold Release, Easy Release, Good Demolding.
|
|||
Uses | |||
Uses may also be described by the following terms: Machine Parts, Mechanical Parts, Machine/Mechanical Parts.
|
|||
Available Documents | |||
Technical Datasheet (English)
|
Injection |
Nominal Value
|
Unit
|
|
Drying Temperature
|
|
°F
|
|
Drying Time
|
|
hr
|
|
Rear Temperature
|
|
°F
|
|
Middle Temperature
|
|
°F
|
|
Nozzle Temperature
|
|
°F
|
|
Processing (Melt) Temp
|
|
°F
|
|
Mold Temperature
|
|
°F
|
Notes |
1Typical properties: these are not to be construed as specifications. |
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content. |