ESTOPLAST ZK 8002NN01 Datasheet

Polycarbonate + ABS

Supplied by Ester Industries Ltd.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Polycarbonate-Acrylonitrile Butadiene Styrene, Unfilled, Natural

Electrical & Electronics and Appliance components
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Mold Release
  • UV Stabilizer
 
Features 
  • Good Flow
  • Good Mold Release
  • High Impact Resistance
  • UV Stabilized
 
Uses 
  • Appliance Components
  • Electrical/Electronic Applications
 
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
 
ASTM D792
Molding Shrinkage - Flow
%
ISO 294-4
Water Absorption (24 hr, 73°F)
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Strength
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
ASTM D256A
Unnotched Izod Impact
 
ASTM D4812
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D648 2
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0,12 in)
 
UL 94
Features
Features may also be described by the following terms: Good Flow, Good Mold Release, Easy Release, Good Demolding, High Impact Resistance.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Appliance Components, Appliance Parts.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Rate B (120°C/h)
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.