Tefzel® 2195 Datasheet

Ethylene Tetrafluoroethylene Copolymer

Supplied by The Chemours Company

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
DuPont™ Tefzel ® 2195 fluoropolymer is a premium-grade resin designed for use in rotational molding. To be effective as a rotational molding resin, Tefzel ® 2195 is a free-flowing powder, with controlled particle size, shape, and size distribution.

The properties of Tefzel ® 2195 in molded form are similar to other grades of Tefzel ® fluoropolymer resin.

Rotational molding is a favored process for making hollow parts (particularly large parts) or for parts with complex geometries. Depending on part design and processing conditions, Tefzel ® 2195 can also be used to rotoline items, whereby the Tefzel® binds to the inner surface of the part to form a lining.

Properly processed rotational moldings made from Tefzel ® 2195 provide the superior properties typical of the fluoropolymer resins: retention of properties after service at 150°C (302°F), useful properties at -100°C (-148°F), and chemical inertness to most industrial chemicals and solvents. Molded products have excellent stiffness and high ultimate elongation.

Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.

Typical End Products
Tefzel ® 2195 is ideal for many end products for fluid handling in the chemical processing industries, including pump housings, vessels, columns, elbows, tees, and pipe sections with unusual shapes. In addition, any hollow structure with internal contours that permits uniform coating by powder flow is a candidate for lining, provided it can withstand high temperatures.
Material Status 
  • Commercial: Active
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • Chemical Resistant
  • Copolymer
  • High Elongation
  • High Stiffness
  • Solvent Resistant
  • Housings
  • Pump Parts
  • Powder
Processing Method 
  • Rotational Molding
Nominal Value
Test Method
Density / Specific Gravity
Apparent (Bulk) Density
Internal Method
Melt Mass-Flow Rate (MFR) (297°C/5.0 kg)
g/10 min
ASTM D3159
Water Absorption (24 hr)
Average Particle Size
Nominal Value
Test Method
Melting Temperature
ASTM D3418
CLTE - Flow (32 to 212°F)
Maximum Service Temperature 2
Features may also be described by the following terms: High Elongation, High Stiffness, Good Chemical Resistance, Chemical Resistant.
Uses may also be described by the following terms: Housings, Housing.
Available Documents
Technical Datasheet (English)
1Typical properties: these are not to be construed as specifications.
2The upper service temperature is based on heat-aging tests and represents the temperature at which tensile strength and elongation would be expected to be diminished 50% after 10,000 hr thermal aging. Upper service temperatures above 150°C (302°F) may be feasible, depending on such factors as chemical exposure and support from the substrate. Particularly when considering uses of Tefzel ® 2195 above 150°C (302°F), perform preliminary testing to verify the acceptability.
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.