Amilan® CM3006G-30 Datasheet

Polyamide 66

30% Glass Fiber

Supplied by Toray Industries, Inc.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Amilan® CM3006G-30 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Applications of Amilan® CM3006G-30 include automotive and housings.

Characteristics include:
  • Flame Rated
  • Heat Resistant
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Features 
  • Good Thermal Stability
Uses 
  • Automotive Applications
  • Housings
 
Part Marking Code 
  • >PA66-GF30<
Physical
Dry
Conditioned
Unit
Test Method
Density (73°F)
--
g/cm³
ISO 1183
Molding Shrinkage 2
      Internal Method
Across Flow : 0,118 in
--
%
 
Flow : 0,118 in
--
%
 
Water Absorption
      ISO 62
73°F, 24 hr
--
%
 
Saturation, 73°F
--
%
 
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Stress
      ISO 527-2
-40°F
psi
 
73°F
psi
 
176°F
psi
 
Tensile Strain
      ISO 527-2
Break, -40°F
%
 
Break, 73°F
%
 
Break, 176°F
%
 
Flexural Modulus
      ISO 178
-40°F
psi
 
73°F
psi
 
176°F
psi
 
Flexural Stress
      ISO 178
-40°F
psi
 
73°F
psi
 
176°F
psi
 
Compressive Stress
      ISO 604
-40°F
psi
 
73°F
psi
 
176°F
psi
 
Shear Strength (73°F)
psi
ASTM D732
Taber Abrasion Resistance (1000 Cycles)
--
mg
ISO 9352
Coefficient of Friction - vs. Metal  3
--
 
Suzuki Method
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
      ISO 179
-40°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
      ISO 179
-40°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness
      ISO 2039-2
M-Scale, 73°F
--
 
 
R-Scale, 73°F
--
 
 
R-Scale, 176°F
--
 
 
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
--
°F
ISO 75-2/B
Melting Temperature
--
°F
DSC
CLTE - Flow
--
in/in/°F
ISO 11359-2
Specific Heat
--
Btu/lb/°F
 
Thermal Conductivity
--
Btu·in/hr/ft²/°F
 
Electrical
Dry
Conditioned
Unit
Test Method
Volume Resistivity
ohms·cm
IEC 60093
Electric Strength
V/mil
IEC 60243-1
Dielectric Constant 4
      IEC 60250
73°F, 50 Hz
 
 
73°F, 1 kHz
 
 
73°F, 1 MHz
 
 
Dissipation Factor 4
      IEC 60250
73°F, 50 Hz
 
 
73°F, 1 kHz
 
 
73°F, 1 MHz
 
 
Arc Resistance 5
sec
UL 746
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating (0,031 in)
 
UL 94
Related Terminology
Dry
This supplier and product may also be known by these terms: PA66
Conditioned
This supplier and product may also be known by these terms: PA66
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Good Thermal Stability.
Uses
Dry
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Housings, Housing.
Available Documents
Dry
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
280x80x3mm
3Without Lubrication
460% RH
5Tungsten Electrode
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.