Product Description | ||||
Polyamide 11 powder for Laser Sintering
Ultrasint PA11, a bio-based material (castor oil), is an interesting alternative to PA12. Parts produced with this material show a high elongation at break, elasticity and high impact resistance. Typical applications are in environments where high deformations (e.g. film hinges) and/or exposure to special surroundings (e.g. chemical, detergents, oil) may occur. Due to its high ductility, it does not splinter in most crash situations. Ultrasint PA11 can be used for skin contact applications. It is processable on most common LS printers. Parameters for printing will be provided. Typical applications are:
|
||||
General | ||||
Material Status
|
|
|||
Availability
|
|
|||
Features
|
|
|||
Uses
|
|
|||
Appearance
|
|
|||
Forms
|
|
|||
Processing Method
|
|
Physical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
Density (Printed Part)
|
|
--
|
g/cm³
|
ISO 1183 |
Apparent (Bulk) Density
|
|
--
|
g/cm³
|
ISO 60 |
Mean Particle Size -
d50
2
|
|
--
|
mil
|
|
Mechanical |
Dry
|
Conditioned
|
Unit
|
Test Method
|
Tensile Modulus
|
ISO 527-2 | |||
X Orientation
: 73°F
|
|
|
psi
|
|
Z Orientation
: 73°F
|
|
|
psi
|
|
X Orientation
: 176°F
|
|
|
psi
|
|
Z Orientation
: 176°F
|
|
|
psi
|
|
Tensile Stress
|
ISO 527-2 | |||
X Orientation
: 73°F
|
|
|
psi
|
|
Z Orientation
: 73°F
|
|
|
psi
|
|
X Orientation
: 176°F
|
|
|
psi
|
|
Z Orientation
: 176°F
|
|
|
psi
|
|
Tensile Strain
|
ISO 527-2 | |||
X Orientation
: Break, 73°F
|
|
|
%
|
|
Z Orientation
: Break, 73°F
|
|
|
%
|
|
X Orientation
: Break, 176°F
|
|
|
%
|
|
Z Orientation
: Break, 176°F
|
|
|
%
|
|
Flexural Modulus
|
ISO 178 | |||
X Orientation
|
|
|
psi
|
|
Z Orientation
|
|
|
psi
|
|
Impact |
Dry
|
Conditioned
|
Unit
|
Test Method
|
Charpy Notched Impact Strength
|
ISO 179 | |||
X Orientation
|
|
|
ft·lb/in²
|
|
Z Orientation
|
|
|
ft·lb/in²
|
|
Charpy Unnotched Impact Strength
|
ISO 179 | |||
X Orientation
|
|
|
ft·lb/in²
|
|
Z Orientation
|
|
|
ft·lb/in²
|
|
Notched Izod Impact Strength
|
ISO 180 | |||
X Orientation
|
|
|
ft·lb/in²
|
|
Z Orientation
|
|
|
ft·lb/in²
|
|
Unnotched Izod Impact Strength
|
ISO 180 | |||
X Orientation
|
|
|
|
|
Z Orientation
|
|
|
ft·lb/in²
|
|
Thermal |
Dry
|
Conditioned
|
Unit
|
Test Method
|
Heat Deflection Temperature
|
||||
66 psi, Unannealed
|
|
--
|
°F
|
ISO 75-2/B |
264 psi, Unannealed
|
|
--
|
°F
|
ISO 75-2/A |
Vicat Softening Temperature
|
||||
--
|
|
--
|
°F
|
ISO 306/B |
--
|
|
--
|
°F
|
ISO 306/A |
Melting Temperature 3
|
|
--
|
°F
|
ISO 11357-3 |
Peak Crystallization Temperature 3
|
|
--
|
°F
|
ISO 11357-3 |
Related Terminology | ||||
Dry
|
This supplier and product may also be known by these terms: ADVANC3D, Innofil3D, Innofil, PA11
|
|||
Conditioned
|
This supplier and product may also be known by these terms: ADVANC3D, Innofil3D, Innofil, PA11
|
|||
Generic Name | ||||
Dry
|
Generic Name may also be described by the following terms: PA11.
|
|||
Conditioned
|
Generic Name may also be described by the following terms: PA11.
|
|||
Features | ||||
Dry
|
Features may also be described by the following terms: Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content, High Elongation, High Elasticity, Highly Elastic, High Impact Resistance, Good Chemical Resistance, Chemical Resistant.
|
|||
Uses | ||||
Dry
|
Uses may also be described by the following terms: Additive Manufacturing, 3D Printing,3-D Printing, Automotive Applications, Automotive Sector.
|
|||
Available Documents | ||||
Dry
|
Technical Datasheet (English)
|
Notes |
1Typical properties: these are not to be construed as specifications. |
2Laser Diffraction |
310 K/min |
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content. |