Ultrasint PP Datasheet

Polypropylene

Supplied by BASF 3D Printing Solutions GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Ultrasint PP is especially developed for the SLS process as an alternative to polyamide. In contrast to commonly used polyamides, Ultrasint PP has an excellent plasticity, higher elongation, low moisture absorption and durability. The fields of application vary widely, from automotive, electrical and sport industries, health care and orthopedic products. Ultrasint PP works perfectly for hinges and clips. It allows post processing like thermoforming or sealing. Ultrasint PP is resistant to most acids and bases and has a slight translucent appearance. Due to its attractive commercial value, it is an interesting material to expand 3D printing applications and volumes. Ultrasint PP has been successfully tested on most common SLS printers. Parameters for printing will be provided.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Acid Resistant
  • Base Resistant
  • Durable
  • High Elasticity
  • High Elongation
  • Low Moisture Absorption
Uses 
  • Additive Manufacturing (3D Printing)
  • Automotive Applications
  • Electrical/Electronic Applications
  • Medical/Healthcare Applications
  • Sporting Goods
Appearance 
  • Translucent
  • White
 
Forms 
  • Powder
Processing Method 
  • 3D Printing, Laser Sintering/Melting
Physical
Nominal Value
Unit
Test Method
Density (Printed Part)
g/cm³
ISO 61
Apparent (Bulk) Density
g/cm³
ISO 1068
Mean Particle Size - d50
mil
ISO 13320
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
ISO 527-2/1B
Tensile Stress 2
psi
ISO 527-2/1B
Tensile Strain 2 (Break)
%
ISO 527-2/1B
Flexural Modulus 2
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength 2
ft·lb/in²
ISO 179/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Melting Temperature 3
°F
ISO 11357-3
Related Terminology
This supplier and product may also be known by these terms: ADVANC3D, Innofil3D, Innofil, Polypropilene, Polypropelene
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Elasticity, Highly Elastic, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, High Elongation.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Medical Applications, Additive Manufacturing, 3D Printing,3-D Printing.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2x-direction
320K/min
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.