Adsint TPU 90 flex Datasheet

Thermoplastic Polyurethane Elastomer

Supplied by BASF 3D Printing Solutions GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Adsint TPU 90 flex (thermoplastic Polyurethane) is a powder developed for SLS printing technology. Unique characteristics of printed parts are high elongation, excellent physical properties combined with a rubber-like elasticity and good abrasive as well as chemical resistance. Typical applications are hard-soft systems, sport footwear, orthopedic models, hoses and tubes, sealings and wheels. Adsint TPU 90 flex has been tested on most common SLS printers. Parameters for printing will be provided. Due to its lower printing temperature (below 130° C), energy and time savings are possible. The recycling rate of up to 100 % implies a high cost advantage. Adsint TPU 90 flex is also available in black and can be perfectly used on machines of all sizes.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Abrasion Resistant
  • Chemical Resistant
  • High Elongation
  • Recyclable Material
 
Uses 
  • Additive Manufacturing (3D Printing)
  • Footwear
  • Hose
  • Seals
  • Sporting Goods
  • Tubing
  • Wheels
Appearance 
  • White
Forms 
  • Powder
Processing Method 
  • 3D Printing, Laser Sintering/Melting
Physical
Nominal Value
Unit
Test Method
Density (Printed Part)
g/cm³
ISO 61
Apparent (Bulk) Density
g/cm³
ISO 1068
Mean Particle Size - d50
mil
ISO 13320
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress 2
psi
ISO 527-2/1B
Tensile Strain 2 (Break)
%
ISO 527-2/1B
Flexural Modulus 2
psi
ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Melting Temperature 3
°F
ISO 11357-3
Related Terminology
This supplier and product may also be known by these terms: ADVANC3D, Innofil3D, Innofil
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, High Elongation.
Uses
Uses may also be described by the following terms: Tubing, Tube, Additive Manufacturing, 3D Printing,3-D Printing.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2x-direction
320K/min
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.