Product Description | |
Adell Polyolefin ZR-17 is a Polyolefin material filled with 35% glass fiber. It is available in North America.
|
|
General | |
Material Status
|
|
Availability
|
|
Filler / Reinforcement
|
|
Forms
|
|
Physical |
Nominal Value
|
Unit
|
Test Method
|
Density / Specific Gravity
|
|
|
ASTM D792 |
Molding Shrinkage -
Flow
|
|
in/in
|
ASTM D955 |
Water Absorption (24 hr)
|
|
%
|
ASTM D570 |
Mechanical |
Nominal Value
|
Unit
|
Test Method
|
Tensile Strength
|
|
psi
|
ASTM D638 |
Tensile Elongation (Break)
|
|
%
|
ASTM D638 |
Flexural Modulus
|
|
psi
|
ASTM D790 |
Flexural Strength
|
|
psi
|
ASTM D790 |
Compressive Strength
|
|
psi
|
ASTM D695 |
Impact |
Nominal Value
|
Unit
|
Test Method
|
Notched Izod Impact (73°F, 0.125 in)
|
|
ft·lb/in
|
ASTM D256 |
Hardness |
Nominal Value
|
Unit
|
Test Method
|
Rockwell Hardness
|
ASTM D785 | ||
M-Scale
|
|
|
|
R-Scale
|
|
|
|
Thermal |
Nominal Value
|
Unit
|
Test Method
|
Deflection Temperature Under Load
|
ASTM D648 | ||
66 psi, Unannealed
|
|
°F
|
|
264 psi, Unannealed
|
|
°F
|
|
Melting Temperature
|
|
°F
|
|
Available Documents | |||
Technical Datasheet (English)
|
Notes |
1Typical properties: these are not to be construed as specifications. |
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content. |