Nucrel® 30707 Datasheet

Ethylene Acrylic Acid Copolymer

Supplied by DuPont Packaging & Industrial Polymers

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
DuPont™ Nucrel® 30707 is a copolymer of ethylene and acrylic acid, made with nominally 6.9 wt% acrylic acid. The resin is available for use in blown/cast film and extrusion coating operations. It can be used on both extrusion and coextrusion equipment designed to process polyethylene resins.
Material Status 
  • Commercial: Active
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • Good Heat Seal
  • Low Temperature Heat Sealability
  • Medical Packaging
  • Pharmaceutical Packaging
  • Sealants
Agency Ratings 
  • Pellets
Processing Method 
  • Blown Film
  • Cast Film
  • Coextrusion
  • Extrusion Coating
Nominal Value
Test Method
Density / Specific Gravity
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Acrylic Acid Content
Nominal Value
Test Method
Vicat Softening Temperature
ASTM D1525, ISO 306
Peak Melting Temperature
ASTM D3418, ISO 3146
Freezing Point 2
ISO 3146
ASTM D3418
Features may also be described by the following terms: Low Temperature Heat Sealability, Low Temperature Heat Seal, Good Heat Seal.
Uses may also be described by the following terms: Medical Packaging, Pharmaceutical Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Available Documents
Technical Datasheet (English)
Nominal Value
Cylinder Zone 1 Temp.
Cylinder Zone 2 Temp.
Cylinder Zone 3 Temp.
Cylinder Zone 4 Temp.
Cylinder Zone 5 Temp.
Adapter Temperature
Melt Temperature
Die Temperature
Extrusion Notes
Processing conditions for blown film:
Zone 1: 135°C
Zone 2: 160°C
Zone 3: 185°C
Zone 4: 185°C
Zone 5: 185°C
Die: 185°C
1Typical properties: these are not to be construed as specifications.
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.