ACRYPET™ VH4 Datasheet

Polymethyl Methacrylate Acrylic

Supplied by Mitsubishi Chemical Corporation

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
ACRYPET™ VH4 is a Polymethyl Methacrylate Acrylic material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for compounding extrusion or extrusion.

Important attributes of ACRYPET™ VH4 are:
  • High Purity
  • Weather Resistant

Typical application of ACRYPET™ VH4: Automotive
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Clean/High Purity
  • Good Colorability
  • Good Weather Resistance
  • High Light Transmission
  • Industrial Resin
Uses 
  • Automotive Applications
Appearance 
  • Clear/Transparent
  • Colors Available
 
Processing Method 
  • Compounding Extrusion
  • Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
ISO 1133
Spiral Flow
    Internal Method
-- 2
in
 
-- 3
in
 
Molding Shrinkage
%
Internal Method
Water Absorption (24 hr, 73°F)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A/1
Tensile Stress
psi
ISO 527-2/1A/5
Tensile Strain (Break)
%
ISO 527-2/1A/5
Flexural Modulus
psi
ISO 178
Flexural Stress
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
CLTE - Flow
in/in/°F
JIS K7197
Specific Heat
Btu/lb/°F
JIS K7123
Thermal Conductivity
Btu·in/hr/ft²/°F
JIS A1412
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
JIS K6911
Volume Resistivity
ohms·cm
JIS K6911
Electric Strength 4
V/mil
JIS K6911
Dielectric Constant (60 Hz)
 
JIS K6911
Dissipation Factor (60 Hz)
 
JIS K6911
Optical
Nominal Value
Unit
Test Method
Refractive Index 5
 
ISO 489
Light Transmittance (Total, 118.1 mil)
%
ISO 13468
Haze (118.1 mil)
%
ISO 14782
Features
Features may also be described by the following terms: High Purity, Clean, High Cleanliness, Good Colorability, High Light Transmission, Good Weather Resistance, Weather Resistant, Good Weatherability.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Melt Temperature: 446°F
3Melt Temperature: 482°F
44000 V/sec
5nD
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.