Ultrasint PA6 X028 Datasheet

Polyamide 6

Supplied by BASF 3D Printing Solutions GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
High modulus, high strength and excellent thermal distortion stability are the key features of Ultrasint PA6 X028. These properties ensure precise feature control, very good mechanical properties and simple surface reprocessing of 3D printed parts, in particular for complex shapes or structures. Parts built of this material have similar properties to those of injection molded PA6.
Ultrasint PA6 X028 can fulfill the requirements of functional applications regarding high accuracy and mechanical strength as well as a high heat distortion temperature - properties, where existing 3D printing materials often show limitations.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Good Thermal Stability
  • High Strength
 
Uses 
  • Additive Manufacturing (3D Printing)
Appearance 
  • White
Forms 
  • Powder
Processing Method 
  • 3D Printing, Laser Sintering/Melting
Physical
Nominal Value
Unit
Test Method
Density (Printed Part)
g/cm³
ISO 1183
Apparent (Bulk) Density
g/cm³
ISO 696
Melt Volume-Flow Rate (MVR) (240°C/2.16 kg)
cm³/10min
ISO 1133
Particle Size Distribution 2
    Internal Method
D10
mil
 
D50
mil
 
D90
mil
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 3
psi
ISO 527-2
Tensile Stress
    ISO 527-2
-- 3
psi
 
-- 4
psi
 
Tensile Strain
    ISO 527-2
Break 3
%
 
Break 4
%
 
Flexural Modulus 3
psi
ISO 178
Flexural Stress
    ISO 178
-- 3
psi
 
-- 4
psi
 
Flexural Strain - Break
    ISO 178
-- 3
%
 
-- 4
%
 
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1
-- 3
ft·lb/in²
 
-- 4
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1U
-- 3
ft·lb/in²
 
-- 4
ft·lb/in²
 
Notched Izod Impact Strength
    ISO 180
-- 3
ft·lb/in²
 
-- 4
ft·lb/in²
 
Unnotched Izod Impact Strength
    ISO 180
-- 3
ft·lb/in²
 
-- 4
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 3
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature 3
     
--
°F
ISO 306/B
--
°F
ISO 306/A
Melting Temperature 5
°F
ISO 11357-3
Peak Crystallization Temperature 5
°F
ISO 11357-3
CLTE - Flow (194°F)
in/in/°F
ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
IEC 60093
Volume Resistivity
     
--
ohms·cm
ISO 3915
--
ohms·cm
IEC 60093
Electric Strength
V/mil
IEC 60243-1
Comparative Tracking Index (0,0472 in)
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
UL 94
FMVSS Flammability
 
FMVSS 302
Related Terminology
This supplier and product may also be known by these terms: ADVANC3D, Innofil3D, Innofil, PA6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Thermal Stability, High Strength.
Uses
Uses may also be described by the following terms: Additive Manufacturing, 3D Printing,3-D Printing.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Laser Diffraction
3x-direction
4z-direction
520K/min
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.