| Product Description | ||||
|
All Ultrasint PA6 grades have in common that they show high modulus, high strength and excellent thermal distortion stability. These properties ensure precise feature control, very good mechanical properties and simple surface reprocessing of 3D printed parts.
Ultrasint PA6 LM X085 black is a reinforced Polyamide 6 based material with a balanced mechanical and thermal property profile. Its lower melting temperature compared to other Ultrasint PA6 powders allows for a processing of the material on standard SLS equipment. The processing temperature is at 175-185°C (345-365°F). The material is suitable to manufacture functional prototypes and small series parts, e.g. for industrial or automotive applications. |
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density (Printed Part)
|
|
g/cm³
|
ISO 1183 |
|
Apparent (Bulk) Density
|
|
g/cm³
|
ISO 696 |
|
Melt Volume-Flow Rate (MVR) (240°C/2.16 kg)
|
|
cm³/10min
|
ISO 1133 |
|
Particle Size Distribution 2
|
Internal Method | ||
|
D10
|
|
mil
|
|
|
D50
|
|
mil
|
|
|
D90
|
|
mil
|
|
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus
|
ISO 527-2 | ||
|
-- 3
|
|
psi
|
|
|
-- 4
|
|
psi
|
|
|
Tensile Stress
|
ISO 527-2 | ||
|
-- 3
|
|
psi
|
|
|
-- 4
|
|
psi
|
|
|
Tensile Strain
|
ISO 527-2 | ||
|
Break 3
|
|
%
|
|
|
Break 4
|
|
%
|
|
|
Flexural Modulus
|
ISO 178 | ||
|
-- 3
|
|
psi
|
|
|
-- 4
|
|
psi
|
|
|
Flexural Stress
|
ISO 178 | ||
|
-- 3
|
|
psi
|
|
|
-- 4
|
|
psi
|
|
|
Flexural Strain -
Break
|
ISO 178 | ||
|
-- 3
|
|
%
|
|
|
-- 4
|
|
%
|
|
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength
|
ISO 179/1 | ||
|
-- 3
|
|
ft·lb/in²
|
|
|
-- 4
|
|
ft·lb/in²
|
|
|
Charpy Unnotched Impact Strength
|
ISO 179/1U | ||
|
-- 3
|
|
ft·lb/in²
|
|
|
-- 4
|
|
ft·lb/in²
|
|
|
Notched Izod Impact Strength
|
ISO 180 | ||
|
-- 3
|
|
ft·lb/in²
|
|
|
-- 4
|
|
ft·lb/in²
|
|
|
Unnotched Izod Impact Strength
|
ISO 180 | ||
|
-- 3
|
|
ft·lb/in²
|
|
|
-- 4
|
|
ft·lb/in²
|
|
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature 3
|
|||
|
66 psi, Unannealed
|
|
°F
|
ISO 75-2/B |
|
264 psi, Unannealed
|
|
°F
|
ISO 75-2/A |
|
Vicat Softening Temperature 3
|
|
°F
|
ISO 306/B |
|
Melting Temperature 5
|
|
°F
|
ISO 11357-3 |
|
Peak Crystallization Temperature 5
|
|
°F
|
ISO 11357-3 |
| Related Terminology | |||
|
This supplier and product may also be known by these terms: ADVANC3D, Innofil3D, Innofil, PA6
|
|||
| Generic Name | |||
|
Generic Name may also be described by the following terms: PA6.
|
|||
| Features | |||
|
Features may also be described by the following terms: Good Thermal Stability, High Strength.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Additive Manufacturing, 3D Printing,3-D Printing.
|
|||
| Available Documents | |||
|
Technical Datasheet (English)
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 2Laser Diffraction |
| 3x-direction |
| 4z-direction |
| 520K/min |
|
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content. |