Ultrafuse PP GF30 Datasheet

Polypropylene

30% Glass Fiber

Supplied by BASF 3D Printing Solutions GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Polypropylene based filament filled with 30% glass fibers for Fused Filament Fabrication.

Ultrafuse PP GF30 is polypropylene, reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of standard FFF 3D-printers. The extreme stiffness makes this material highly suitable for demanding applications. Other key properties of PP GF30 are high heat resistance and improved UV-resistance. All these excellent properties make this filament highly suitable in an industrial environment.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Features 
  • High Heat Resistance
  • Ultra High Stiffness
  • UV Resistant
Uses 
  • Additive Manufacturing (3D Printing)
  • Industrial Applications
 
Forms 
  • Filament
Processing Method 
  • 3D Printing, Fused Filament Fabrication (FFF)
Physical
Nominal Value
Unit
Test Method
Density (Printed Part)
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)
cm³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
    ISO 527-1
XY Orientation
psi
 
ZX Orientation
psi
 
Tensile Stress
    ISO 527-2
XY Orientation
psi
 
ZX Orientation
psi
 
Tensile Strain
    ISO 527-2
XY Orientation : Break
%
 
ZX Orientation : Break
%
 
Flexural Modulus
    ISO 178
XY Orientation
psi
 
XZ Orientation
psi
 
ZX Orientation
psi
 
Flexural Stress
    ISO 178
XY Orientation
psi
 
XZ Orientation
psi
 
ZX Orientation
psi
 
Flexural Strain at Break
    ISO 178
XY Orientation
%
 
XZ Orientation
%
 
ZX Orientation
%
 
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179
XY Orientation
ft·lb/in²
 
XZ Orientation
ft·lb/in²
 
ZX Orientation
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179
XY Orientation
ft·lb/in²
 
XZ Orientation
ft·lb/in²
 
ZX Orientation
ft·lb/in²
 
Notched Izod Impact Strength
    ISO 180
XY Orientation
ft·lb/in²
 
XZ Orientation
ft·lb/in²
 
ZX Orientation
ft·lb/in²
 
Unnotched Izod Impact Strength
    ISO 180
XY Orientation
ft·lb/in²
 
XZ Orientation
ft·lb/in²
 
ZX Orientation
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Glass Transition Temperature
°F
ISO 11357-2
Melting Temperature
°F
ISO 11357-3
Peak Crystallization Temperature
°F
ISO 11357-3
Related Terminology
This supplier and product may also be known by these terms: ADVANC3D, Innofil3D, Innofil, Polypropilene, Polypropelene
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Ultra High Stiffness, High Heat Resistance, Heat Resistant, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Additive Manufacturing, 3D Printing,3-D Printing.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.