Ultrafuse PET Datasheet

Polyethylene Terephthalate

Supplied by BASF 3D Printing Solutions GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Amorphous Polyethylene Terephthalate based filament for Fused Filament Fabrication.

Ultrafuse PET is made from a premium PET and prints as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. PET will give you outstanding printing results: a good layer adhesion, a high resolution and it is easy to handle. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Amorphous
  • Good Adhesion
  • Good Processability
  • Good Strength
  • Good Surface Finish
  • Recyclable Material
Uses 
  • Additive Manufacturing (3D Printing)
Appearance 
  • Colors Available
Forms 
  • Filament
Processing Method 
  • 3D Printing, Fused Filament Fabrication (FFF)
Physical
Nominal Value
Unit
Test Method
Density (Printed Part)
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/2.16 kg)
cm³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
    ISO 527-1
XY Orientation
psi
 
ZX Orientation
psi
 
Tensile Stress
    ISO 527-2
XY Orientation
psi
 
ZX Orientation
psi
 
Tensile Strain
    ISO 527-2
XY Orientation : Break
%
 
ZX Orientation : Break
%
 
Flexural Modulus
    ISO 178
XY Orientation
psi
 
XZ Orientation
psi
 
ZX Orientation
psi
 
Flexural Stress
    ISO 178
XY Orientation
psi
 
XZ Orientation
psi
 
ZX Orientation
psi
 
Flexural Strain at Break
    ISO 178
XY Orientation
%
 
XZ Orientation
%
 
ZX Orientation
%
 
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179
XY Orientation
ft·lb/in²
 
XZ Orientation
ft·lb/in²
 
ZX Orientation
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179
XY Orientation
ft·lb/in²
 
XZ Orientation
ft·lb/in²
 
ZX Orientation
ft·lb/in²
 
Notched Izod Impact Strength
    ISO 180
XY Orientation
ft·lb/in²
 
XZ Orientation
ft·lb/in²
 
ZX Orientation
ft·lb/in²
 
Unnotched Izod Impact Strength
    ISO 180
XY Orientation
ft·lb/in²
 
XZ Orientation
ft·lb/in²
 
ZX Orientation
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Glass Transition Temperature
°F
ISO 11357-2
Related Terminology
This supplier and product may also be known by these terms: ADVANC3D, Innofil3D, Innofil
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Adhesion, Good Strength, Good Surface Finish.
Uses
Uses may also be described by the following terms: Additive Manufacturing, 3D Printing,3-D Printing.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.