| Product Description | ||||
|
Flame retardant copolymer PP halogen free
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Additive
|
|
|||
|
Features
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183/A |
|
Melt Volume-Flow Rate (MVR) (230°C/5.0 kg)
|
|
cm³/10min
|
ISO 1133 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Stress
|
ISO 527-2/1A | ||
|
Yield
|
|
psi
|
|
|
Break
|
|
psi
|
|
|
Tensile Strain (Break)
|
|
%
|
ISO 527-2/1A |
|
Flexural Modulus
|
|
psi
|
ISO 178 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 179/1eA |
|
Charpy Unnotched Impact Strength (73°F)
|
|
|
ISO 179/1eU |
|
Notched Izod Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 180/1A |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Shore Hardness (Shore D)
|
|
|
ISO 868 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (264 psi, Unannealed)
|
|
°F
|
ISO 75-2/Af |
|
Vicat Softening Temperature
|
|
°F
|
ISO 306/A50 |
|
Ball Pressure Test (268°F)
|
|
|
IEC 60695-10-2 |
|
Melting Temperature
|
|
°F
|
ISO 11357-3 |
| Electrical |
Nominal Value
|
Unit
|
Test Method
|
|
Comparative Tracking Index
|
|
V
|
IEC 60112 |
| Flammability |
Nominal Value
|
Unit
|
Test Method
|
|
Flame Rating (0,06 in)
|
|
|
UL 94 |
|
Glow Wire Flammability Index (0,08 in)
|
|
°F
|
IEC 60695-2-12 |
|
Oxygen Index
|
|
%
|
ISO 4589-2 |
| Features | |||
|
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
|
|||
| Available Documents | |||
|
Technical Datasheet (English)
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content. |