ADDITEC® CBI 53081 NOIR 110 C Datasheet

Polypropylene

Carbon Fiber

Supplied by ADDIPLAST

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
High modulus PP compound reinforced with carbon fibers
Particulary suitable for structural parts
Low density for weight savings approach
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Carbon Fiber
Features 
  • High Stiffness
  • Low Density
 
Uses 
  • Structural Parts
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage
%
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break)
psi
ISO 527-2/1A
Tensile Strain (Break)
%
ISO 527-2/1A
Flexural Modulus
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Notched Izod Impact Strength
ft·lb/in²
ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/Af
Vicat Softening Temperature
°F
ISO 306/A50
Ball Pressure Test (275°F)
 
IEC 60695-10-2
Melting Temperature
°F
ISO 11357-3
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
IEC 60093
Related Terminology
This supplier and product may also be known by these terms: Polypropilene, Polypropelene
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Stiffness, Low Density, Low Specific Gravity.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.