Miramid® DB2010CW Datasheet

Polyamide 6

20% Glass Bead; 10% Glass Fiber

Supplied by BASF Leuna GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Miramid® DB2010CW is a Polyamide 6 (Nylon 6) material filled with 20% glass bead and 10% glass fiber. It is available in Europe for injection molding.

Important attributes of Miramid® DB2010CW are:
  • Flame Rated
  • Chemical Resistant
  • Crystalline
  • Good Aesthetics
  • Good Dimensional Stability

Typical applications include:
  • Automotive
  • Engineering/Industrial Parts
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Bead, 20% Filler by Weight
  • Glass Fiber, 10% Filler by Weight
 
Additive 
  • Heat Stabilizer
  • Mold Release
 
Features 
  • Chemical Resistant
  • Crystalline
  • Fuel Resistant
  • Good Dimensional Stability
  • Good Flow
  • Good Stiffness
  • Good Surface Finish
  • Grease Resistant
  • Heat Stabilized
  • Low Warpage
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Automotive Interior Trim
  • Engineering Parts
 
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
lb/in³
ISO 1183 2
Water Absorption
      ISO 62 2
Saturation
--
%
 
Equilibrium
--
%
 
Viscosity number
--
cm³/g
ISO 307, 1157, 1628 2
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile modulus
psi
ISO 527-2 2
Tensile Stress (Break)
psi
ISO 527-2 2
Tensile Strain (Break)
%
ISO 527-2 2
Flexural Stress 3
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength
      ISO 179/1eA 2
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy impact strength
      ISO 179/1eU 2
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Dry
Conditioned
Unit
Test Method
Ball Indentation Hardness
--
psi
ISO 2039-1
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
      ISO 75-2 2
66 psi
--
°F
 
264 psi
--
°F
 
Continuous Use Temperature
      ISO 2578
-- 4
--
°F
 
-- 5
--
°F
 
Melting Temperature (DSC)
--
°F
ISO 3146
Electrical
Dry
Conditioned
Unit
Test Method
Volume resistivity
ohms·in
IEC 60093 2
Dielectric Constant (1 MHz)
 
IEC 60250
Dissipation Factor (1 MHz)
 
IEC 60250 2
Comparative tracking index
--
 
IEC 60112 2
Flammability
Dry
Conditioned
Unit
Test Method
Burning Rate (0,0394 in)
--
in/min
FMVSS 302
Flame Rating (0,06 in)
--
 
UL 94
Burning Behav. at thickness h (0,0591 in)
--
 
ISO 1210 2
Glow Wire Flammability Index (0,04 in)
--
°F
IEC 60695-2-12
Related Terminology
Dry
This supplier and product may also be known by these terms: PA6
Conditioned
This supplier and product may also be known by these terms: PA6
Generic Name
Dry
Generic Name may also be described by the following terms: PA6.
Conditioned
Generic Name may also be described by the following terms: PA6.
Features
Dry
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Flow, Good Stiffness, Good Dimensional Stability, Dimensionally Stable, Good Surface Finish, Low Warpage, Low Warp, Good Chemical Resistance, Chemical Resistant.
Uses
Dry
Uses may also be described by the following terms: Engineering Parts.
Available Documents
Dry
Processing - Injection Molding (English)
Technical Datasheet (English)
Conditioned
Technical Datasheet (English)
Injection
Dry
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3Typical values for uncoloured product at 23°C and 50% relative humidity
4Temperature index at loss of 50% tensile strength, 5000h
5Short time
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.