Miramid® SE35CW Datasheet

Polyamide 66

35% Glass Fiber

Supplied by BASF Leuna GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Miramid® SE35CW is a Polyamide 66 (Nylon 66) material filled with 35% glass fiber. It is available in Europe for injection molding.

Important attributes of Miramid® SE35CW are:
  • Chemical Resistant
  • Crystalline
  • Fast Molding Cycle
  • Good Dimensional Stability
  • Good Stiffness

Typical applications include:
  • Automotive
  • Hose/Tubing
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber, 35% Filler by Weight
Additive 
  • Heat Stabilizer
  • Mold Release
 
Features 
  • Crystalline
  • Fast Molding Cycle
  • Fuel Resistant
  • Good Dimensional Stability
  • Good Flow
  • Good Stiffness
  • Grease Resistant
  • Heat Stabilized
  • High Rigidity
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Automotive Applications
  • Tubing
 
Automotive Specifications 
  •  1
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Density
--
lb/in³
ISO 1183 3
Water Absorption
      ISO 62 3
Saturation
--
%
 
Equilibrium
--
%
 
Viscosity number
--
cm³/g
ISO 307, 1157, 1628 3
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile modulus
psi
ISO 527-2 3
Tensile Stress (Break)
psi
ISO 527-2 3
Tensile Strain (Break)
%
ISO 527-2 3
Flexural Stress 4
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength
      ISO 179/1eA 3
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy impact strength
      ISO 179/1eU 3
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
      ISO 75-2 3
66 psi
--
°F
 
264 psi
--
°F
 
Melting Temperature (DSC)
--
°F
ISO 3146
Electrical
Dry
Conditioned
Unit
Test Method
Volume resistivity
ohms·in
IEC 60093 3
Dielectric Constant (1 MHz)
 
IEC 60250
Dissipation Factor (1 MHz)
 
IEC 60250 3
Comparative tracking index
--
 
IEC 60112 3
Related Terminology
Dry
This supplier and product may also be known by these terms: PA66
Conditioned
This supplier and product may also be known by these terms: PA66
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Dimensional Stability, Dimensionally Stable, Good Flow, High Rigidity, Good Stiffness.
Uses
Dry
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Tubing, Tube.
Automotive Specifications
Dry
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FMVSS (1).
Available Documents
Dry
Processing - Injection Molding (English)
Technical Datasheet (English)
Injection
Dry
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Thickness >= 1mm
2Typical properties: these are not to be construed as specifications.
3Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
4Typical values for uncoloured product at 23°C
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.