Miramid® SB30C Datasheet

Polyamide 66

30% Glass Bead

Supplied by BASF Leuna GmbH

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Miramid® SB30C is a Polyamide 66 (Nylon 66) material filled with 30% glass bead. It is available in Europe for injection molding.

Important attributes of Miramid® SB30C are:
  • Chemical Resistant
  • Crystalline
  • Good Aesthetics
  • Good Dimensional Stability
  • Good Stiffness

Typical applications include:
  • Automotive
  • Engineering/Industrial Parts
  • Housings
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Bead, 30% Filler by Weight
Additive 
  • Mold Release
Features 
  • Crystalline
  • Fuel Resistant
  • Good Dimensional Stability
  • Good Flow
  • Good Stiffness
  • Good Surface Finish
  • Grease Resistant
  • Low Warpage
  • Oil Resistant
  • Solvent Resistant
Uses 
  • Automotive Under the Hood
  • Engineering Parts
  • Housings
Automotive Specifications 
Forms 
  • Granules
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
 
Physical
Dry
Conditioned
Unit
Test Method
Density
--
lb/in³
ISO 1183 2
Water Absorption
      ISO 62 2
Saturation
--
%
 
Equilibrium
--
%
 
Viscosity number
--
cm³/g
ISO 307, 1157, 1628 2
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile modulus
psi
ISO 527-2 2
Tensile Stress (Break)
psi
ISO 527-2 2
Tensile Strain (Break)
%
ISO 527-2 2
Flexural Stress 3
--
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength
      ISO 179/1eA 2
-22°F
--
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy impact strength
      ISO 179/1eU 2
-22°F
--
ft·lb/in²
 
73°F
 
 
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load (264 psi)
--
°F
ISO 75-2 2
Melting Temperature (DSC)
--
°F
ISO 3146
Electrical
Dry
Conditioned
Unit
Test Method
Volume resistivity
ohms·in
IEC 60093 2
Dielectric Constant (1 MHz)
--
 
IEC 60250
Comparative tracking index
--
 
IEC 60112 2
Related Terminology
Dry
This supplier and product may also be known by these terms: PA66
Conditioned
This supplier and product may also be known by these terms: PA66
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Good Flow, Good Dimensional Stability, Dimensionally Stable, Good Stiffness, Good Surface Finish, Low Warpage, Low Warp.
Uses
Dry
Uses may also be described by the following terms: Housings, Housing, Engineering Parts.
Automotive Specifications
Dry
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FMVSS (1).
Available Documents
Dry
Processing - Injection Molding (English)
Technical Datasheet (English)
Injection
Dry
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3Typical values for uncoloured product at 23°C and 50% relative humidity
 
UL and the UL logo are trademarks of UL LLC © 2019. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.