POLYFORT® FPP 20 T Datasheet

Polypropylene Homopolymer

20% Talc

Supplied by A. Schulman Europe

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
20% talc filled PP-Homopolymer
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Talc, 20% Filler by Weight
UL File Number 
  • E86615
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PP-T
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A/1
Tensile Stress (Yield)
psi
ISO 527-2/1A/50
Tensile Strain (Yield)
%
ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/Bf
264 psi, Unannealed
°F
ISO 75-2/Af
Vicat Softening Temperature
     
--
°F
ISO 306/A50
--
°F
ISO 306/B50
Ball Pressure Test (257°F)
 
IEC 60695-10-2
Flammability
Nominal Value
Unit
Test Method
Burning Rate
in/min
ISO 3795
Flammability Classification
    IEC 60695-11-10, -20
0,06 in
 
 
0,12 in
 
 
Glow Wire Flammability Index
    IEC 60695-2-12
0,06 in
°F
 
0,12 in
°F
 
Glow Wire Ignition Temperature
    IEC 60695-2-13
0,06 in
°F
 
0,12 in
°F
 
Additional Information
1.) Not for use in food contact applications
2.) Not for use in medical or pharmaceutical applications
Available Documents
Technical Datasheet
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Regrind
%
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Notes
*Drying normally not necessary
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.