Adsyl 5 C 30 F Datasheet

Polyolefin

Supplied by LyondellBasell Industries

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Adsyl 5 C 30 F is an advanced polyolefin, specially designed for use as a sealing or metallized layer in co-extruded film applications.
This grade features a very low seal initiation temperature and good optics.
It does not contain slip or anti-block additives.
For regulatory information please refer to Adsyl 5 C 30 F Product Stewardship Bulletin (PSB).
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Breathable
  • Good Optical Properties
  • Heat Sealable
  • Low Temperature Heat Sealability
  • Metallizable
Uses 
  • Bi-axially Oriented Film
  • Cast Film
  • Film
  • Food Packaging
  • Laminates
  • Packaging
  • Shrink Wrap
Processing Method 
  • Bi-axially Oriented Film
  • Cast Film
  • Coextruded Film
  • Double-Bubble Film
  
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus - 1% Secant  2
psi
 ASTM D790
Films
Nominal Value
Unit
Test Method
Tensile Modulus
     ISO 527-3/25
MD : 2.0 mil, Cast Film
psi
  
TD : 2.0 mil, Cast Film
psi
  
Tensile Stress
     ISO 527-3/500
MD : Yield, 2.0 mil, Cast Film
psi
  
TD : Yield, 2.0 mil, Cast Film
psi
  
MD : Break, 2.0 mil, Cast Film
psi
  
TD : Break, 2.0 mil, Cast Film
psi
  
Tensile Elongation
     ISO 527-3/500
MD : Yield, 2.0 mil, Cast Film
%
  
TD : Yield, 2.0 mil, Cast Film
%
  
MD : Break, 2.0 mil, Cast Film
%
  
TD : Break, 2.0 mil, Cast Film
%
  
Seal Initiation Temperature
°F
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed
°F
 ASTM D648
66 psi, Unannealed
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Melting Temperature
°F
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil)
 
 ASTM D2457
Haze (1.97 mil)
%
 ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel
Features
Features may also be described by the following terms: Breathable, Breathability, Low Temperature Heat Sealability, Low Temperature Heat Seal, Opticals, Good Optical Properties.
Uses
Uses may also be described by the following terms: Cast Film, Food Packaging, Bi-axially Oriented Film, Biaxially Oriented Film, Shrink Wrap.
Available Documents
Processing - Mold Shrink (English)
Technical Datasheet - lyondellbasell Adsyl 5 C 30 F (ASTM) (English)
Technical Datasheet - lyondellbasell Adsyl 5 C 30 F (ISO) (English)
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.