Bapolene® 2035 Datasheet

High Density Polyethylene Copolymer

Supplied by Bamberger Polymers, Inc.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
This resin is a high density polyethylene copolymer for blow molding applications. It is recommended for applications that require high top load strength and good ESCR properties. This product meets US FDA 21 CFR 177.1520.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Copolymer
  • High ESCR (Stress Crack Resist.)
  • High Strength
Uses 
  • Blow Molding Applications
  • Containers
 
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Environmental Stress-Cracking Resistance (ESCR) (100% Igepal)
hr
ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus - Tangent  2
psi
ASTM D638
Tensile Strength 3 (Yield)
psi
ASTM D638
Tensile Elongation 3 (Break)
%
ASTM D638
Features
Features may also be described by the following terms: High Strength, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Available Documents
Technical Datasheet
Notes
1Typical properties: these are not to be construed as specifications.
23 Point Load
32,0 in/min
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.