Adell PS IF-110 Datasheet

High Impact Polystyrene

Supplied by Adell Plastics, Inc.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Adell PS IF-110 is a flame retardant impact polystyrene concentrate. IF-110 is a cost effective material to be used in high impact polystyrene applications where UL rating of V-0 is critical.

The concentrate is typically mixed with HIPS at a ratio of two parts of base resin with one part of IF-110 to obtain a V-0 rating at 1/16" for the molded product.

The physical properties of the concentrate have been engineered to produce molded parts from HIPS and the concentrate blend that have properties similar to those molded of HIPS.

The property data of test bars produced from two parts HIPS and one part IF-110 is shown on this datasheet.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Flame Retardant
  • High Impact Resistance
 
Uses 
  • Electrical Housing
  • Housings
 
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/1.2 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/1A
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/1U
Gardner Impact
in·lb
ASTM D3029
Features
Features may also be described by the following terms: High Impact Resistance.
Uses
Uses may also be described by the following terms: Housings, Housing, Electrical Housings, Electrical Housing.
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.