Home > Plastics > Materials > Wellamid® > Wellamid® GF33-66/6 XE-WBK - Datasheet

Wellamid® GF33-66/6 XE-WBK Datasheet

Polyamide 66/6 Copolymer

33% Glass Fiber

Supplied by Wellman Engineering Resins

View Complete Data Sheet Search 119000+ Data Sheets
Create Your Free Account or Login
Product Description
Glass Fiber Reinforced, Weatherable Nylon Resin (PA66/6)
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
 
Filler / Reinforcement 
  • Glass Fiber, 33% Filler by Weight
Features 
  • Weather Resistant
Automotive Specifications 
Appearance 
  • Black
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density (73°F)
g/cm³
ISO 1183
Molding Shrinkage
    ISO 294-4
Across Flow : 73°F
%
 
Flow : 73°F
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (73°F, Injection Molded)
psi
ISO 527-2
Tensile Strain (Break, 73°F, Injection Molded)
%
ISO 527-2
Flexural Modulus (73°F, Injection Molded)
psi
ISO 178
Flexural Stress (73°F, Injection Molded)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Unnotched Izod Impact Strength (73°F, Injection Molded)
ft·lb/in²
ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Melting Temperature (DSC)
°F
ISO 3146
Related Terminology
This supplier and product may also be known by these terms: PA666, PA66/6
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Features may also be described by the following terms: Good Weather Resistance, Weather Resistant.
Automotive Specifications
This plastic material has approval for 3 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1), DELPHI (1), SAE (1).
Available Documents
Processing (English)
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Back Pressure
psi
 
Screw Speed
rpm
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.