Home > Plastics > Materials > GELOY™ > GELOY™ CR3020 resin - Datasheet

GELOY™ CR3020 resin Datasheet

Acrylonitrile Styrene Acrylate

Supplied by SABIC Innovative Plastics

View Complete Data Sheet Search 119000+ Data Sheets
Create Your Free Account or Login
Product Description
ASA, excellent weatherable, extrusion grade
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Weather Resistant
Processing Method 
  • Profile Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR)
     
220°C/10.0 kg
g/10 min
ASTM D1238
220°C/10.0 kg
g/10 min
ISO 1133
Molding Shrinkage - Flow (0,126 in)
in/in
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
-- 2
psi
ASTM D638
--
psi
ISO 527-2/1
Tensile Strength
     
Yield 3
psi
ASTM D638
Yield
psi
ISO 527-2/50
Break 3
psi
ASTM D638
Break
psi
ISO 527-2/50
Tensile Elongation
     
Yield 3
%
ASTM D638
Yield
%
ISO 527-2/50
Break 3
%
ASTM D638
Break
%
ISO 527-2/50
Flexural Modulus
     
1,97 in Span 4
psi
ASTM D790
-- 5
psi
ISO 178
Flexural Stress
     
-- 5, 6
psi
ISO 178
Yield, 1,97 in Span 4
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     
-22°F
ft·lb/in
ASTM D256
73°F
ft·lb/in
ASTM D256
-22°F 7
ft·lb/in²
ISO 180/1A
73°F 7
ft·lb/in²
ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)
in·lb
ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
264 psi, Unannealed, 0,126 in
°F
ASTM D648
264 psi, Unannealed, 2,52 in Span 8
°F
ISO 75-2/Af
Vicat Softening Temperature
°F
ISO 306/B50, ASTM D1525 9
CLTE
    ISO 11359-2
Flow : -40 to 104°F
in/in/°F
 
Transverse : -40 to 104°F
in/in/°F
 
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland
Features
Features may also be described by the following terms: Good Weather Resistance, Weather Resistant.
Available Documents
Technical Datasheet
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Adapter Temperature
°F
 
Melt Temperature
°F
 
Die Temperature
°F
 
Calibration Temp, First
°F
 
Extrusion Notes
Drying Time (Cumulative): 12 hrs
Minimum Moisture Content: 0.02 %
Notes
1Typical properties: these are not to be construed as specifications.
20,20 in/min
3Type I, 2,0 in/min
40,051 in/min
50,079 in/min
6Yield
780*10*4
880*10*4 mm
9Rate B (120°C/h), Loading 2 (50 N)
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.