REPOL® B400MN Datasheet

Polypropylene Impact Copolymer

Supplied by Reliance Industries Limited

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Repol B400MN is recommended for use in Injection Moulding processes where high flow and medium impact strength are required. It is an ideal material to use in appliance parts, automotive components, grilled products and thin wall products. Repol B400MN contains nucleating agent.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Nucleating Agent
Features 
  • Food Contact Acceptable
  • High Flow
  • Medium Impact Resistance
  • Nucleated
 
Uses 
  • Appliance Components
  • Automotive Applications
  • Compounding
  • Thin-walled Parts
 
Agency Ratings 
Processing Method 
  • Compounding
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Injection Molded)
psi
ASTM D638
Tensile Elongation 2 (Yield, Injection Molded)
%
ASTM D638
Flexural Modulus - 1% Secant (Injection Molded)
psi
ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
ASTM D648
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, Medium Impact Resistance.
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts, Automotive Applications, Automotive Sector, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Compounding, Compounds.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2,0 in/min
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.