RELENE® F46003 Datasheet

High Density Polyethylene

Supplied by Reliance Industries Limited

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
F46003 is a High Density Polyethylene grade suitable for general purpose blown film & extrusion blow moulding applications. Articles blown from this grade exhibit moderate to good stiffness. The resin offers good melt strength, ESCR and impact resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Melt Strength
  • Good Stiffness
  • High ESCR (Stress Crack Resist.)
Uses 
  • Blow Molding Applications
  • Film
 
Agency Ratings 
Processing Method 
  • Blown Film
  • Extrusion Blow Molding
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Tensile Strength
    ASTM D882
MD : Yield, 1.6 mil, Blown Film
psi
 
TD : Yield, 1.6 mil, Blown Film
psi
 
MD : Break, 1.6 mil, Blown Film
psi
 
TD : Break, 1.6 mil, Blown Film
psi
 
Tensile Elongation
    ASTM D882
MD : Break, 1.6 mil, Blown Film
%
 
TD : Break, 1.6 mil, Blown Film
%
 
Dart Drop Impact (1.6 mil, Blown Film)
g
ASTM D1709A
Elmendorf Tear Strength
    ASTM D1922
MD : 1.6 mil, Blown Film
g
 
TD : 1.6 mil, Blown Film
g
 
Features
Features may also be described by the following terms: Good Stiffness, Good Melt Strength, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2017. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.