Advanced Composites FNS-175S Datasheet

Polypropylene

Talc

Supplied by Advanced Composites, Inc.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Advanced Composites FNS-175S is a Polypropylene product filled with talc. It is available in North America.

Characteristics include:
  • High Stiffness
  • Impact Modified
  • Impact Resistant
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc
Additive 
  • Rubber Impact Modifier
Features 
  • High Impact Resistance
  • High Stiffness
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
ASTM D638
Tensile Elongation 2 (Break)
%
ASTM D638
Flexural Modulus 3
psi
ASTM D790
Flexural Strength 3
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
    ASTM D256
-22°F
ft·lb/in
 
73°F
ft·lb/in
 
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
ASTM D648
Related Terminology
This supplier and product may also be known by these terms: Polypropilene, Polypropelene
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Stiffness, High Impact Resistance.
Available Documents
PP/TPO Processing & Troubleshooting (English)
Processing (English)
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Cushion
in
 
Injection Notes
Injection Pressure: 50 to 60% oof machine capacity
Screw RPM: 1 to 2 secs before mold open
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.079 in/min
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.