ACLAR® UltRx 2000 Datasheet

Polychlorotrifluoroethylene

Supplied by Honeywell

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Aclar UltRx 2000 is a 2.00 mil PCTFE homopolymer, high performance barrier film for the pharmaceutical and medical markets. It thermoforms well on conventional blister packaging equipment and provides the best barrier of any clear film.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Barrier Resin
  • Homopolymer
 
Uses 
  • Film
  • Medical/Healthcare Applications
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Cast Film
  • Thermoforming
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Films
Nominal Value
Unit
Test Method
Secant Modulus
    ASTM D882
MD : 2,0 mil
psi
 
TD : 2,0 mil
psi
 
Tensile Strength
    ASTM D882
MD : Yield, 2,0 mil
psi
 
TD : Yield, 2,0 mil
psi
 
Tensile Elongation
    ASTM D882
MD : Yield, 2,0 mil
%
 
TD : Yield, 2,0 mil
%
 
Water Vapor Transmission Rate
    ASTM F1249
2,0 mil, 77°F, 60% RH
g·mil/100in²/atm/24 hr
 
2,0 mil, 86°F, 60% RH
g·mil/100in²/atm/24 hr
 
2,0 mil, 104°F, 75% RH
g·mil/100in²/atm/24 hr
 
2,0 mil, 100°F, 100% RH
g·mil/100in²/atm/24 hr
 
Optical
Nominal Value
Unit
Test Method
Haze (2,00 mil)
%
ASTM D1003
Additional Information
Yield, No Standard: 9.34 m²/kg
Tensile Strength @ Yld, ASTM D882, MD, 2 mil: 7000 to 10000 psi
Tensile Strength @ Yld, ASTM D882, TD, 2 mil: 4500 to 7500 psi
Tensile Elongation @ Yield, ASTM D882, MD, 2 mil: 150 to 200%
Tensile Elongation @ Yield, ASTM D882, TD, 2 mil: 175 to 250%
Secant Modulus, ASTM D882, 2 mil, MD & TD: 170000 to 200000
Crystalline Melting Point, ASTM D4591: 211 °C
Dimensional Stability, ASTM D1204, MD: </= ± 6 %
Dimensional Stability, ASTM D1204, TD: </= ± 6%
Surface Tension, ASTM D2578, treated side, 2 mil: >/= 42 dynes/cm
Uses
Uses may also be described by the following terms: Medical Applications.
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.