ACLAR® 33C (0.75 mil) Datasheet

Polychlorotrifluoroethylene

Supplied by Honeywell

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Aclar 33C (0.75 mil) is a copolymer film consisting primarily of chlorotrifluoroethylene (CTFE). It is thermoformable on both pressure and vacuum forming machines.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Copolymer
Forms 
  • Pellets
Processing Method 
  • Cast Film
  • Thermoforming
  • Vacuum Forming
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Films
Nominal Value
Unit
Test Method
Secant Modulus
    ASTM D882
MD : 0.75 mil
psi
 
TD : 0.75 mil
psi
 
Tensile Strength
    ASTM D882
MD : Yield, 0.75 mil
psi
 
TD : Yield, 0.75 mil
psi
 
Tensile Elongation
    ASTM D882
MD : Yield, 0.75 mil
%
 
TD : Yield, 0.75 mil
%
 
Water Vapor Transmission Rate (0.75 mil, 100°F, 100% RH)
g·mil/100in²/atm/24 hr
ASTM F1249
Thermal
Nominal Value
Unit
Test Method
Peak Crystallization Temperature (DSC)
°F
ASTM D3418
Optical
Nominal Value
Unit
Test Method
Haze (0.750 mil)
%
ASTM D1003
Additional Information
Yield, No Standard: 24.8 m²/kg
Tear Strength, ASTM D1004, Graves MD: 400 to 450 g/mil
Tear Strength, ASTM D1004, Graves TD: 350 to 400 g/mil
Crystalline Melting Point, ASTM D4591: 206 °C
Dimensional Stability, ASTM D1204, MD: </= 2.5 %
Dimensional Stability, ASTM D1204, TD: </= 2.5 %
Tensile Strength @ yld, ASTM D882, MD: 11000 to 13000 psi
Tensile Strength @ yld, ASTM D882, TD: 3000 to 5000 psi
Elongation @ Yield, ASTM D882, MD: 50 to 100%
Elongation @ Yield, ASTM D882, TD: 50 to 100%
Secant Modulus, ASTM D882, MD: 220000 to 260000 psi
Secant Modulus, ASTM D882, TD: 190000 to 230000 psi
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2021. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.