ABSCOM® CP1350 Datasheet

Acrylonitrile Butadiene Styrene

Supplied by Polymer Compounders Limited

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
ABSCOM CP1350 is an easy flowing injection moulding plating ABS grade with exceptional performances. Typical applications include shower heads, point of sale equipment and automotive interior.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Flow
  • Platable
 
Uses 
  • Automotive Interior Parts
  • Bathroom Accessories
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
ISO 1133
Molding Shrinkage
%
ISO 294-4
Water Absorption
    ISO 62
Saturation, 73°F
%
 
Equilibrium, 73°F, 50% RH
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress
     
Yield
psi
ISO 527-2/50
Yield, -40°F
psi
ISO 527-2
Yield, 176°F
psi
ISO 527-2
Tensile Strain
     
Yield
%
ISO 527-2/50
Yield, -40°F
%
ISO 527-2
Yield, 176°F
%
ISO 527-2
Break
%
ISO 527-2
Flexural Stress
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
ISO 179/1eU
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/Be
264 psi, Unannealed
°F
ISO 75-2/Ae
Vicat Softening Temperature
°F
ISO 306/B50
CLTE - Flow
in/in/°F
ISO 11359-2
Flammability
Nominal Value
Unit
Test Method
Flame Rating
    UL 94
0.031 in
 
 
0.06 in
 
 
Features
Features may also be described by the following terms: Good Flow.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Velocity
in/min
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.