Home > Plastics > Materials > DURANEX® > DURANEX® 330HR - Datasheet

DURANEX® 330HR Datasheet

Polybutylene Terephthalate

30% Glass Fiber

Supplied by Polyplastics Co., Ltd.

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
DURANEX® 330HR is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber, 30% Filler by Weight
Features 
  • Hydrolysis Resistant
UL File Number 
  • E213445
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Part Marking Code (ISO 11469)
  • >PBT-GF30<
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Water Absorption (73°F, 24 hr)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Stress
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
CLTE
    Internal Method
Flow : 73 to 131°F
in/in/°F
 
Transverse : 73 to 131°F
in/in/°F
 
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohms·cm
IEC 60093
Electric Strength (0,118 in)
V/mil
IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
UL 94
Additional Information
Nominal Value
Unit
Test Method
Color Number
 
 
Related Terminology
This supplier and product may also be known by these terms: WinTech Polymer Ltd.
Available Documents
Processing - Molding Conditions (English)
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Mold Temperature
°F
 
Holding Pressure
psi
 
Screw Speed
rpm
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.