ADDINYL® B2 Z V15 Datasheet

Polyamide 6

Glass Fiber

Supplied by ADDIPLAST

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
ADDINYL® B2 Z V15 is a Polyamide 6 (Nylon 6) material filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Glass Fiber
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183/A
Molding Shrinkage
--
%
Internal Method
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Stress (Break)
psi
ISO 527-2/1A
Tensile Strain (Break)
%
ISO 527-2/1A
Flexural Modulus
psi
ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
ISO 179/1eU
Notched Izod Impact Strength
ft·lb/in²
ISO 180/1A
Hardness
Dry
Conditioned
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 868
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
--
°F
ISO 75-2/Af
Melting Temperature
--
°F
ISO 11357-3
Electrical
Dry
Conditioned
Unit
Test Method
Comparative Tracking Index
--
V
IEC 60112
Flammability
Dry
Conditioned
Unit
Test Method
Glow Wire Flammability Index (0.08 in)
--
°F
IEC 60695-2-12
Related Terminology
Dry
This supplier and product may also be known by these terms: PA6
Conditioned
This supplier and product may also be known by these terms: PA6
Generic Name
Dry
Generic Name may also be described by the following terms: PA6.
Conditioned
Generic Name may also be described by the following terms: PA6.
Available Documents
Dry
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.