Advanced Composites ATX646M Datasheet

Polypropylene

Supplied by Advanced Composites, Inc.

Create your free Prospector account to view this complete product datasheet. A free account includes access to hundreds of thousands of detailed technical datasheets. Create Your Free Account
Product Description
Advanced Composites ATX646M is a Polypropylene product. It is available in North America. Typical application: Automotive.

Characteristics include:
  • High Flow
  • Impact Resistant
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • High Flow
  • Low Temperature Impact Resistance
 
Uses 
  • Automotive Applications
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2
Flexural Modulus
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
    ISO 180
-40°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Instrumented Dart Impact
    ASTM D3763
32°F
in·lb
 
73°F
in·lb
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Related Terminology
This supplier and product may also be known by these terms: Polypropilene, Polypropelene
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, High Flow, High Melt, High MFI.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Available Documents
PP/TPO Processing & Troubleshooting (English)
Processing (English)
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Cushion
in
 
Injection Notes
Injection Pressure: 50 to 60% of machine capacity
Screw RPM: 1 to 2 secs before mold open
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2020. All Rights Reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.