Home > Plastics > Materials > Daelim Po1y® > Daelim Po1y® TR580 - Datasheet

Daelim Po1y® TR580 Datasheet

High Density Polyethylene

Supplied by DAELIM INDUSTRIAL CO., LTD.

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
Daelim Po1y® TR580 is a High Density Polyethylene product. It is available in Asia Pacific or Europe. Applications of Daelim Po1y® TR580 include containers and food contact applications.

Characteristics include:
  • Antioxidant
  • Good Processability
  • High ESCR (Stress Crack Resistant)
  • Impact Resistant
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
 
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Good Impact Resistance
  • Good Processability
  • High ESCR (Stress Crack Resist.)
 
Uses 
  • Drums
Agency Ratings 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Environmental Stress-Cracking Resistance (Compression Molded, F50)
hr
ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Compression Molded)
psi
ASTM D638
Tensile Elongation (Break, Compression Molded)
%
ASTM D638
Flexural Modulus (Compression Molded)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (-22°F, Compression Molded)
 
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ASTM D1525
Peak Melting Temperature
°F
ASTM D3418
Related Terminology
This supplier and product may also be known by these terms: Daelim Poly, Daelim Po1y
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.