Home > Plastics > Materials > Delrin® > Delrin® 100T BK602 - Datasheet

Delrin® 100T BK602 Datasheet

ACETAL RESIN

Supplied by DuPont Performance Polymers

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
Toughened High Viscosity Acetal Homopolymer
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Lubricant
  • Mold Release
 
Features 
  • High Viscosity
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
 
Part Marking Code (ISO 11469)
  • >POM-I<
Resin ID (ISO 1043)
  • POM-I
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Yield)
%
ISO 527-2
Nominal Tensile Strain at Break
%
ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Melting Temperature 2
°F
ISO 11357-3
Annealing Temperature
°F
 
Annealing Time - Optional
min/mm
 
Flammability
Nominal Value
Unit
Test Method
Burning Rate 3 (0.0394 in)
in/min
ISO 3795
Flame Rating (0.06 in)
 
UL 94, IEC 60695-11-10, -20
Additional Information
Nominal Value
Unit
Test Method
Emission
mg/kg
VDA 275
Related Terminology
This supplier and product may also be known by these terms: Derlin, Polyacetal
Generic Name
Generic Name may also be described by the following terms: Polyacetal.
Features
Features may also be described by the following terms: High Viscosity.
Available Documents
Processing - Injection Molding (English)
Typical Processing for DuPont Engineering Polymers (English)
White Paper - Property Advantages of Delrin® Acetal Homopolymer - a guide for design engineers (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Processing (Melt) Temp
°F
 
Melt Temperature, Optimum
°F
 
Mold Temperature
°F
 
Mold Temperature, Optimum
°F
 
Holding Pressure
psi
 
Drying Recommended
 
 
Hold Pressure Time
s/mm
 
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Melt Temperature
°F
 
Extrusion Melt Temperature, Optimum
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
3FMVSS 302
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.