Home > Plastics > Materials > MAJORIS > MAJORIS FN060C - Datasheet

MAJORIS FN060C Datasheet

Polypropylene Copolymer

Supplied by AD majoris

View Complete Data Sheet Search 118000+ Data Sheets
Create Your Free Account! or Login
Product Description
FN060C is a high performance PP copolymer characterised by high impact strength combined with high stiffness and good flow properties.

The product is available in natural (FN060C) but other colours can be supplied on request.

APPLICATIONS
FN060C has been developed especially for demanding applications intended for injection moulding of automotive interior and appliances parts.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Flow
  • High Impact Resistance
  • High Stiffness
  • Recyclable Material
Uses 
  • Appliance Components
  • Automotive Interior Parts
 
Appearance 
  • Colors Available
  • Natural Color
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage (0.0787 in)
%
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress (Yield)
psi
ISO 527-2/50
Tensile Strain
    ISO 527-2/50
Yield
%
 
Break
%
 
Flexural Modulus 2
psi
ISO 178
Flexural Stress
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
-4°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-4°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
ISO 868
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ISO 306/A
--
°F
ISO 306/B
Flammability
Nominal Value
Unit
Test Method
Fogging - 100°C/16h
mg
DIN 75201
Additional Information
Nominal Value
Unit
Test Method
Emission
µgC/g
VDA 277
Features
Features may also be described by the following terms: High Stiffness, High Impact Resistance, Good Flow.
Uses
Uses may also be described by the following terms: Appliance Components, Appliance Parts.
Available Documents
Technical Datasheet (English)
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Injection Notes
Holding pressure: 50 to 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
UL and the UL logo are trademarks of UL LLC © 2016. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.