Produktbeschreibung | ||||
Polypropylene-based powder for Laser Sintering
Ultrasint PP nat 01 is especially developed for the LS process as an alternative to polyamide. In contrast to commonly used polyamides, it offers an excellent plasticity, high elongation, low moisture absorption and high durability. The fields of application vary widely from automotive, electrical and sports goods to health care and orthopedic products. It works perfectly for hinges and clips and allows post processing like thermoforming or sealing. Ultrasint PP nat 01 is resistant to most acids and bases and has a slightly translucent appearance. Due to its attractive commercial value, it is an interesting material to expand 3D printing applications and volumes. It has been successfully tested on most common LS printers. Parameters for printing will be provided. Typical applications are:
|
||||
Allgemein | ||||
Materialstatus
|
|
|||
Verfügbarkeit
|
|
|||
Merkmale
|
|
|||
Anwendungen
|
|
|||
Aussehen
|
|
|||
Form
|
|
|||
Verarbeitungsmethoden
|
|
Physikalische Eigenschaften |
Nominalwert
|
Einheit
|
Prüfmethode
|
Dichte (Printed Part)
|
|
g/cm³
|
ISO 61 |
Schüttdichte
|
|
g/cm³
|
ISO 1068 |
Mean Particle Size -
d50
|
|
mil
|
ISO 13320 |
Mechanische Eigenschaften |
Nominalwert
|
Einheit
|
Prüfmethode
|
Zug-E-Modul
|
ISO 527-2 | ||
X Orientation
|
|
psi
|
|
Z Orientation
|
|
psi
|
|
Zugfestigkeit
|
ISO 527-2 | ||
X Orientation
|
|
psi
|
|
Z Orientation
|
|
psi
|
|
Streckdehnung
|
ISO 527-2 | ||
X Orientation
: Bruch
|
|
%
|
|
Z Orientation
: Bruch
|
|
%
|
|
Biege-E-Modul
|
ISO 178 | ||
X Orientation
|
|
psi
|
|
Z Orientation
|
|
psi
|
|
Schlagzähigkeit |
Nominalwert
|
Einheit
|
Prüfmethode
|
Charpy-Kerbschlagzähigkeit (+23°C)
|
ISO 179/1 | ||
X Orientation
|
|
ft·lb/in²
|
|
Z Orientation
|
|
ft·lb/in²
|
|
Charpy-Schlagzähigkeit, ungekerbt
|
ISO 179/1U | ||
X Orientation
|
|
ft·lb/in²
|
|
Z Orientation
|
|
ft·lb/in²
|
|
Izod-Kerbschlagzähigkeit
|
ISO 180 | ||
X Orientation
|
|
ft·lb/in²
|
|
Z Orientation
|
|
ft·lb/in²
|
|
Izod-Schlagzähigkeit, ungekerbt
|
ISO 180 | ||
X Orientation
|
|
ft·lb/in²
|
|
Z Orientation
|
|
ft·lb/in²
|
|
Thermische Eigenschaften |
Nominalwert
|
Einheit
|
Prüfmethode
|
Wärmeformbeständigkeit
|
|||
66 psi, ungeglüht
|
|
°F
|
ISO 75-2/B |
264 psi, ungeglüht
|
|
°F
|
ISO 75-2/A |
Vicat-Erweichungstemperatur
|
|||
--
|
|
°F
|
ISO 306/B |
--
|
|
°F
|
ISO 306/A |
Massetemperatur 2
|
|
°F
|
ISO 11357-3 |
Spitzenkristallisationstemperatur 2
|
|
°F
|
ISO 11357-3 |
Related Terminology | |||
This supplier and product may also be known by these terms: ADVANC3D, Innofil3D, Innofil, Polypropilen, Polypropelen
|
|||
Allgemeine Bezeichnung | |||
Allgemeine Bezeichnung may also be described by the following terms: Polypropilen, Polypropelen.
|
|||
Merkmale | |||
Merkmale may also be described by the following terms: Hoch Elastizität, Niedrige Feuchteaufnahme, Niedrige Wasserabsorption, Wasserbeständig, Feuchtigkeitsbeständig, Hoch Ausdehnung.
|
|||
Anwendungen | |||
Anwendungen may also be described by the following terms: Fahrzeuganwendungen, Fahrzeugbranche, Elektrische Anwendungen, Medizinischgeräte, Additive Manufacturing, 3D Printing,3-D Printing, Rohrleitungen, Rohr.
|
|||
Available Documents | |||
Technical Datasheet (English)
|
Anmerkungen |
1Typische Eigenschaften, nicht als Spezifikationen anzusehen |
210 K/min |
UL und das UL-Logo sind Handelsmarken von UL LLC © 2021 Alle Rechte vorbehalten.
Die in diesem Datenblatt enthaltenen Informationen wurden von UL Prospector auf der Grundlage der Angaben des Herstellers des Materials zusammengestellt. UL Prospector setzt sich dafür ein, die Genauigkeit der Daten zu gewährleisten. UL Prospector haftet jedoch in keinem Fall für die Daten/Werte und empfiehlt dringend, sich diese bei der endgültigen Auswahl des Materials vom Hersteller bestätigen zu lassen. |