Prospector

Hostaform® C 13021

Famille générique : Acetal (POM) CopolymerDocuments mis à disposition par : Celanese Corporation
Injection molding grade with moderate flow
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988- POM-K, M-GNR, 04-002 POM copolymer Easy flowing Injection molding type for precision molded parts and thin-walled molded parts with high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Monomers and additives are listed in EU-Regulation (EU) 10/2011 FDA compliant according to 21 CFR 177.2470 UL-registration for all colours and a thickness more than 1.5 mm as UL 94 HB, temperature index UL 746 B electrical 110 °C, mechanical 90 °C. Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more than 1 mm. Ranges of applications: automotive engineering, precision engineering, electric and electronical industry, domestic appliances. FDA = Food and Drug Administration (USA) UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)
Propriétés générales

Consultez la fiche technique complète de Hostaform® C 13021 en créant gratuitement votre compte Prospector. Vous y trouverez des informations exhaustives sur les propriétés physiques et mécaniques et sur la dureté

État du matériau
Comercial: Activo
Documents
UL Yellow Cards

E42337 - Celanese Services Germany GmbH

Télécharger le document
Disponibilité
África y Oriente Medio, Asia-Pacífico, Europa, Latinoamérica, Norteamérica
Utilisations
Aplicaciones de automoción
La recherche de plastiques automobiles est incluse dans l’abonnement Premium.
BMW GS 93016
Méthode de traitement
Moldeo por Inyección
Données multipoints
  • Isothermal Stress vs. Strain (ISO 11403)
  • Secant Modulus vs. Strain (ISO 11403)
  • Shear Stress vs. Shear Rate (ISO 11403)
  • Viscosity vs. Shear Rate (ISO 11403)
Autres propriétés
添加剤, 特徴, 形状, 密度, メルトボリュームフローレート(MVR), 成形収縮, 給水率 平衡/23℃, 吸水率 23℃/50RH, 引張弾性率, 引張降伏応力, 引張り降伏歪み, 引張り破壊呼び歪み, 引張クリープ係数 1時間, 引張クリープ係数 1000時間, 曲げ弾性率, 曲げ強度, シャルピー衝撃強度(ノッチ付), シャルピー衝撃強度(ノッチなし), ボール押込み硬さ, DTUL (1.80 MPa) アニールなし, ビカット軟化温度, 溶解温度, 線膨張係数、平行, 表面抵抗性, 体積抵抗率, 耐電圧, 比誘電率, 誘電正接, 耐トラッキング性(CTI), 燃焼定格, 溶融密度, 溶融比熱, 溶融熱伝導性, 射出温度, その他の特性, 乾燥温度, 乾燥時間, 推奨最高水分量, ホッパー温度, 後部温度, 中部温度, 前部温度, ノズル温度, 成形(溶融)温度, 金型温度, 射出速度, 背圧
Accédez à 47 propriétés dans Plastiques. Créez votre compte gratuit ou connectez-vous à Prospector.
Traitement en cours

Find specific processing information for Hostaform® POM as well as general information for the Acetal (POM) Copolymer generic family. S’inscrire ou Connexion pour en savoir plus.

Où acheter

Vous pouvez acheter Hostaform® C 13021 auprès de 6 distributeurs ou fabricants. S’inscrire ou Connexion pour en savoir plus.

Se connecter/S’inscrire à Prospector
Fonctions Premium
Chercher des cartes jaunes UL
UL Yellow Cards

Les cartes jaunes d’UL sont une garantie de sécurité et de qualité mondialement reconnue, une démonstration certifiée de la manière dont les plastiques ont satisfait à un ensemble spécifique de critères de performance.

PROSPECTOR

Trouvez des solutions, pas seulement des matériaux..

Avec Prospector, vous disposez d’outils et de fonctions dynamiques qui vous permettront de trouver des solutions au plus vite.

S’inscrire aujourd’hui