Epoxy Typical Properties Generic Epoxy - Mineral

Product Description
This data represents typical values that have been calculated from all products classified as: Generic Epoxy - Mineral

This information is provided for comparative purposes only.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Mineral
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
1,52 to 2,05
 
ASTM D792
Apparent (Bulk) Density
0,80 to 1,02
g/cm³
ASTM D1895
Molding Shrinkage - Flow (73°F)
1,0E-3 to 5,1E-3
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (73°F)
10400 to 14000
psi
ASTM D638
Flexural Modulus (73°F)
710000 to 2,90E+6
psi
ASTM D790
Flexural Strength (73°F)
5890 to 21800
psi
ASTM D790
Compressive Strength (73°F)
16000 to 35400
psi
ASTM D695
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
0,30 to 0,69
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Barcol Hardness
65 to 93
 
ASTM D2583
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed)
527 to 540
°F
ASTM D648
Glass Transition Temperature
329 to 347
°F
ASTM E1356
CLTE - Flow
1,1E-5 to 5,1E-5
in/in/°F
ASTM D696
Thermal Conductivity (73°F)
2,9 to 5,9
Btu·in/hr/ft²/°F
ASTM C177
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
1,0E+15 to 1,1E+16
ohms
ASTM D257
Volume Resistivity (73°F)
1,0E+15 to 5,0E+16
ohms·cm
ASTM D257
Dielectric Strength (73°F)
340 to 400
V/mil
ASTM D149
Dielectric Constant (73°F)
3,78 to 5,41
 
ASTM D150
Dissipation Factor (73°F)
0,011 to 0,020
 
ASTM D150
Arc Resistance
180
sec
ASTM D495
Thermoset
Nominal Value
Unit
Test Method
Pot Life (73°F)
20 to 420
min
 
Shelf Life
0,29 to 52
wk
 
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
329
°F
 
Injection Pressure
525 to 4250
psi
 
Injection Notes
This data represents typical values that have been calculated from all products classified as: Generic Epoxy - Mineral

This information is provided for comparative purposes only.
Notes
1Typical properties: these are not to be construed as specifications.