Acetal Typical Properties Generic Acetal (POM) Copolymer+PUR

Product Description
This data represents typical values that have been calculated from all products classified as: Generic Acetal (POM) Copolymer+PUR

This information is provided for comparative purposes only.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Physical
Nominal Value
Unit
Test Method
Density (73°F)
1.33 to 1.37
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
6.94 to 12.0
cm³/10min
ISO 1133
Molding Shrinkage (73°F)
1.6 to 2.0
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
102000 to 290000
psi
ISO 527-2
Nominal Tensile Strain at Break (73°F)
50 to 51
%
ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
4.0 to 9.5
ft·lb/in²
ISO 179
Thermal
Nominal Value
Unit
Test Method
CLTE - Flow
7.2E-5 to 7.8E-5
in/in/°F
ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
1.0E+12 to 1.0E+14
ohms
IEC 60093
Volume Resistivity (73°F)
7.6E+12 to 1.0E+14
ohms·cm
IEC 60093
Injection
Nominal Value
Unit
 
Drying Temperature
211 to 212
°F
 
Drying Time
3.0
hr
 
Processing (Melt) Temp
396 to 397
°F
 
Mold Temperature
158
°F
 
Injection Notes
This data represents typical values that have been calculated from all products classified as: Generic Acetal (POM) Copolymer+PUR

This information is provided for comparative purposes only.
Notes
1Typical properties: these are not to be construed as specifications.