Acetal Typical Properties Generic Acetal (POM) Copolymer - Aramid Fiber

Product Description
This data represents typical values that have been calculated from all products classified as: Generic Acetal (POM) Copolymer - Aramid Fiber

This information is provided for comparative purposes only.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Aramid Fiber
Also Available In 
  • Europe
  • Latin America
  • North America
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
     
--
1,41 to 1,52
 
ASTM D792
73°F
1,40 to 1,46
g/cm³
ISO 1183
Molding Shrinkage
     
Flow : 73°F
0,011 to 0,030
in/in
ASTM D955
73°F
1,5 to 1,8
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
73°F
400000 to 588000
psi
ASTM D638
73°F
376000 to 508000
psi
ISO 527-2
Tensile Strength (73°F)
7580 to 9010
psi
ASTM D638
Tensile Elongation
     
Yield, 73°F
6,4 to 10
%
ASTM D638
Break, 73°F
4,0 to 14
%
ISO 527-2
Flexural Modulus
     
73°F
377000 to 520000
psi
ASTM D790
73°F
290000 to 551000
psi
ISO 178
Flexural Strength
     
73°F
9930 to 14100
psi
ASTM D790
73°F
8850 to 11200
psi
ISO 178
Coefficient of Friction
0,13 to 0,23
 
ASTM D1894
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     
73°F
1,1 to 1,4
ft·lb/in
ASTM D256
73°F
2,4 to 3,8
ft·lb/in²
ISO 180
Unnotched Izod Impact (73°F)
6,9 to 11
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
264 psi, Unannealed
274 to 295
°F
ASTM D648
264 psi, Unannealed
187 to 277
°F
ISO 75-2/A
Injection
Nominal Value
Unit
 
Drying Temperature
175 to 250
°F
 
Drying Time
2,0 to 4,0
hr
 
Processing (Melt) Temp
392 to 406
°F
 
Mold Temperature
199 to 203
°F
 
Injection Pressure
12500
psi
 
Injection Notes
This data represents typical values that have been calculated from all products classified as: Generic Acetal (POM) Copolymer - Aramid Fiber

This information is provided for comparative purposes only.
Notes
1Typical properties: these are not to be construed as specifications.