Polyaryletherketone (PAEK) Typical Properties Generic PAEK

Product Description
This data represents typical values that have been calculated from all products classified as: Generic PAEK

This information is provided for comparative purposes only.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Physical
Nominal Value
Unit
Test Method
Density / Specific Gravity
1,29 to 1,33
 
ASTM D792
Water Absorption (24 hr, 73°F)
0,022 to 0,21
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
73°F
421000 to 643000
psi
ASTM D638
73°F
450000 to 2,92E+6
psi
ISO 527-2
Tensile Strength (73°F)
12200 to 24500
psi
ASTM D638
Tensile Elongation (Break, 73°F)
0,90 to 41
%
ASTM D638, ISO 527-2
Flexural Modulus
     
73°F
418000 to 1,53E+6
psi
ASTM D790
73°F
435000 to 2,51E+6
psi
ISO 178
Flexural Strength
     
73°F
18000 to 30700
psi
ASTM D790
73°F
15400 to 42100
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     
73°F
0,075 to 1,9
ft·lb/in
ASTM D256
73°F
2,8 to 3,6
ft·lb/in²
ISO 180
Thermal
Nominal Value
Unit
Test Method
Thermal Conductivity (73°F)
1,5 to 1,7
Btu·in/hr/ft²/°F
ASTM C177
Electrical
Nominal Value
Unit
Test Method
Dielectric Constant (73°F)
3,06 to 3,13
 
ASTM D150
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity
170 to 600
Pa·s
ASTM D3835
Injection
Nominal Value
Unit
 
Drying Temperature
275 to 356
°F
 
Rear Temperature
670 to 716
°F
 
Middle Temperature
689 to 717
°F
 
Front Temperature
698 to 717
°F
 
Nozzle Temperature
705 to 716
°F
 
Mold Temperature
325 to 401
°F
 
Injection Notes
This data represents typical values that have been calculated from all products classified as: Generic PAEK

This information is provided for comparative purposes only.
Notes
1Typical properties: these are not to be construed as specifications.