Polypropylene (PP) Typical Properties Generic PP Alloy

  • Generic PP Alloy
  • Generic PP Copolymer
  • Generic PP Copolymer - Barium Sulfate
  • Generic PP Copolymer - Calcium Carbonate
  • Generic PP Copolymer - Glass Fiber
  • Generic PP Copolymer - Glass\Mineral
  • Generic PP Copolymer - Mica
  • Generic PP Copolymer - Mineral
  • Generic PP Copolymer - Talc
  • Generic PP Copolymer - Wollastonite (CaSiO3)
  • Generic PP Homopolymer
  • Generic PP Homopolymer - Barium Sulfate
  • Generic PP Homopolymer - Calcium Carbonate
  • Generic PP Homopolymer - Chalk
  • Generic PP Homopolymer - Glass Bead
  • Generic PP Homopolymer - Glass Fiber
  • Generic PP Homopolymer - Glass Fiber, Long
  • Generic PP Homopolymer - Glass\Mica
  • Generic PP Homopolymer - Glass\Mineral
  • Generic PP Homopolymer - Mica
  • Generic PP Homopolymer - Mineral
  • Generic PP Homopolymer - Talc
  • Generic PP Homopolymer - Talc\Mineral
  • Generic PP Homopolymer - Unspecified
  • Generic PP Homopolymer - Wollastonite (CaSiO3)
  • Generic PP Impact Copolymer
  • Generic PP Impact Copolymer - Glass Fiber
  • Generic PP Impact Copolymer - Mineral
  • Generic PP Impact Copolymer - Talc
  • Generic PP Random Copolymer
  • Generic PP, High Crystal
  • Generic PP, HMS
  • Generic PP, Unspecified
  • Generic PP, Unspecified - Calcium Carbonate
  • Generic PP, Unspecified - Carbon Fiber
  • Generic PP, Unspecified - Glass Bead
  • Generic PP, Unspecified - Glass Bead\Glass Fiber
  • Generic PP, Unspecified - Glass Fiber
  • Generic PP, Unspecified - Glass Fiber, Long
  • Generic PP, Unspecified - Glass\Mineral
  • Generic PP, Unspecified - Mica
  • Generic PP, Unspecified - Mineral
  • Generic PP, Unspecified - Proprietary
  • Generic PP, Unspecified - Stainless Steel Fiber
  • Generic PP, Unspecified - Talc
  • Generic PP, Unspecified - Unspecified
  • Generic PP, Unspecified - Wood Fiber
  • Generic PP+EPDM
  • Generic TPO
  • Generic TPO - Glass Fiber
  • Generic TPO - Mineral
  • Generic PP Terpolymer
  • Generic PP, Unspecified - Cellulose
  • Generic PP+EPDM - Talc
  • Generic TPO - Talc
  • Generic PP, Unspecified - Natural Fiber
  • Product Description
    This data represents typical values that have been calculated from all products classified as: Generic PP Alloy

    This information is provided for comparative purposes only.
    General  
    Material Status 
    • Commercial: Active
    Availability 
    • Africa & Middle East
    • Asia Pacific
    • Europe
    • Latin America
    • North America
    Physical
    Nominal Value
    Unit
    Test Method
    Density / Specific Gravity
    0.892 to 1.15
     
    ASTM D792
    Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
    4.9 to 15
    g/10 min
    ASTM D1238
    Molding Shrinkage - Flow (73°F)
    2.0E-3 to 0.016
    in/in
    ASTM D955
    Mechanical
    Nominal Value
    Unit
    Test Method
    Tensile Strength (Yield, 73°F)
    2650 to 5120
    psi
    ASTM D638
    Tensile Elongation
        ASTM D638
    Yield, 73°F
    2.4 to 12
    %
     
    Break, 73°F
    10 to 30
    %
     
    Flexural Modulus (73°F)
    47300 to 352000
    psi
    ASTM D790
    Coefficient of Friction
    0.25 to 0.40
     
    ASTM D1894
    Films
    Nominal Value
    Unit
    Test Method
    Film Thickness - Tested
    60 to 204
    mil
     
    Secant Modulus
        ASTM D882
    MD
    362000 to 435000
    psi
     
    TD
    304000 to 522000
    psi
     
    Tensile Strength
        ASTM D882
    MD : Yield
    24700 to 34700
    psi
     
    TD : Yield
    27400 to 30500
    psi
     
    Tensile Elongation
        ASTM D882
    MD : Break
    89 to 120
    %
     
    TD : Break
    80 to 130
    %
     
    Seal Strength
    0.94
    lbf/in
    ASTM F88
    Seal Initiation Temperature
    223 to 269
    °F
     
    Oxygen Permeability (73°F)
    0.39 to 100
    cm³·mil/100in²/atm/24 hr
    ASTM D3985
    Water Vapor Transmission Rate
    0.050 to 0.65
    g/100 in²/24 hr
    ASTM F1249
    Blocking Load
    6.0
    g
    ASTM D3354
    Impact
    Nominal Value
    Unit
    Test Method
    Notched Izod Impact (73°F)
    0.40 to 1.6
    ft·lb/in
    ASTM D256
    Hardness
    Nominal Value
    Unit
    Test Method
    Rockwell Hardness (73°F)
    67 to 113
     
    ASTM D785
    Optical
    Nominal Value
    Unit
    Test Method
    Gloss
    95 to 140
     
    ASTM D2457
    Haze
    1.25 to 2.56
    %
    ASTM D1003
    Notes
    1Typical properties: these are not to be construed as specifications.