Acrylonitrile Ethylene Styrene (AES) Typical Properties Generic AES

  • Generic AES
  • Generic AES+PC
  • Product Description
    This data represents typical values that have been calculated from all products classified as: Generic AES

    This information is provided for comparative purposes only.
    General  
    Material Status 
    • Commercial: Active
    Availability 
    • Asia Pacific
    • Europe
    • Latin America
    • North America
     
    Physical
    Nominal Value
    Unit
    Test Method
    Density / Specific Gravity
         
    --
    1.04 to 1.05
     
    ASTM D792
    73°F
    1.03 to 1.05
    g/cm³
    ISO 1183
    Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
    4.5 to 47
    g/10 min
    ISO 1133
    Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
    5.0 to 21
    cm³/10min
    ISO 1133
    Molding Shrinkage
         
    Flow : 73°F
    5.5E-3 to 7.0E-3
    in/in
    ASTM D955
    73°F
    0.49 to 0.70
    %
    ISO 294-4
    Mechanical
    Nominal Value
    Unit
    Test Method
    Tensile Modulus (73°F)
    296000 to 344000
    psi
    ISO 527-2
    Tensile Strength
         
    Yield, 73°F
    7080 to 7820
    psi
    ASTM D638
    Yield, 73°F
    6950 to 7410
    psi
    ISO 527-2
    73°F
    6450 to 7290
    psi
    ISO 527-2
    Flexural Modulus
         
    73°F
    318000 to 383000
    psi
    ASTM D790
    73°F
    319000 to 367000
    psi
    ISO 178
    Flexural Strength
         
    73°F
    9760 to 12100
    psi
    ASTM D790
    73°F
    8820 to 11300
    psi
    ISO 178
    Impact
    Nominal Value
    Unit
    Test Method
    Charpy Notched Impact Strength (73°F)
    3.8 to 15
    ft·lb/in²
    ISO 179
    Notched Izod Impact (73°F)
    2.1 to 3.9
    ft·lb/in
    ASTM D256
    Hardness
    Nominal Value
    Unit
    Test Method
    Rockwell Hardness (73°F)
    100 to 115
     
    ISO 2039-2
    Thermal
    Nominal Value
    Unit
    Test Method
    Deflection Temperature Under Load
         
    264 psi, Unannealed
    184 to 195
    °F
    ASTM D648
    264 psi, Unannealed
    161 to 180
    °F
    ISO 75-2/A
    CLTE - Flow
    3.9E-5 to 5.1E-5
    in/in/°F
    ISO 11359-2
    Injection
    Nominal Value
    Unit
     
    Drying Temperature
    181 to 195
    °F
     
    Drying Time
    3.0 to 3.6
    hr
     
    Suggested Max Moisture
    0.050 to 0.10
    %
     
    Rear Temperature
    338 to 482
    °F
     
    Middle Temperature
    374 to 482
    °F
     
    Front Temperature
    392 to 488
    °F
     
    Nozzle Temperature
    374 to 475
    °F
     
    Processing (Melt) Temp
    419 to 477
    °F
     
    Mold Temperature
    131 to 167
    °F
     
    Injection Pressure
    14500 to 15200
    psi
     
    Back Pressure
    62.5 to 1450
    psi
     
    Screw Speed
    50 to 75
    rpm
     
    Injection Notes
    This data represents typical values that have been calculated from all products classified as: Generic AES

    This information is provided for comparative purposes only.
    Notes
    1Typical properties: these are not to be construed as specifications.