供給可能

E41613 - Covestro Deutschland AG [PC Resins]

Dokument herunterladen

アジア太平洋地域, アフリカ＆中東, ラテンアメリカ, 北アメリカ, 欧州

医療／ヘルスケア用途

射出成形

• Creep Modulus vs. Time (ISO 11403)
• Isochronous Stress vs. Strain (ISO 11403)
• Isothermal Stress vs. Strain (ISO 11403)
• Secant Modulus vs. Strain (ISO 11403)
• Shear Modulus vs. Temperature (ISO 11403)
• Specific Volume vs Temperature (ISO 11403)
• Viscosity vs. Shear Rate (ISO 11403)

Features, Agency Ratings, RoHS Compliance, Appearance, Density, Apparent (Bulk) Density, Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Molding Shrinkage, Water Absorption Sat/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Stress at Yield, Tensile Stress at Break, Tensile Strain at Yield, Tensile Strain at Break, Nominal Tensile Strain at Break, Tensile Creep Modulus 1h, Tensile Creep Modulus 1000h, Flexural Modulus, Flexural Stress, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact Strength, Multi-Axial Instrumented Impact Energy, Multi-Axial Instrumented Impact Peak Force, Ball Indentation Hardness, DTUL (0.45 MPa) Unannealed, DTUL (1.80 MPa) Unannealed, Glass Transition Temperature, Vicat Softening Temperature, Ball Pressure Test, Coefficient of Linear Thermal Expansion, Flow, Coefficient of Linear Thermal Expansion, Transverse, Thermal Conductivity, Surface Resistivity, Volume Resistivity, Electric Strength, Relative Permittivity, Dissipation Factor, Comparative Tracking Index, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Oxygen Index, Refractive Index, Light Transmittance, Haze, Additional Properties, Drying Temperature, Drying Time, Suggested Max Moisture, Suggested Shot Size, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Back Pressure, Vent Depth, Injection Notes