Polyamid (Nylon): Nylon MXD6
| Produkt | Verfügbarkeit | Produktbeschreibung |
|---|---|---|
| Bergamid™ BG6900-8029 RS GR006 | Asien Pazifik |
50% Glass fiber reinforced MXD6, good surface finish
|
| Generic Nylon MXD6 - Glass Fiber | Afrika und Mittlerer Osten |
This data represents typical values that have been calculated from all products classified as: Generic Nylon MXD6 - Glass Fiber
This information is provided for comparative purposes only.
|
| MAXIMID® 7550GF | Asien Pazifik |
- MAXIMID 7550GF is a glass fiber 50%-reinforced MXD6-PA grade.
- It is suitable for automotive, electrical & electronics, and consumer parts.
|
| MAXIMID® 7550GVS | Asien Pazifik |
- MAXIMID 7550GVS is a glass fiber 50%-reinforced and flame-retardant MXD6-PA grade.
- It is suitable for automotive, electrical & electronics, and consumer parts.
|
| Reny™ 1002H | Afrika und Mittlerer Osten |
GF-reinforced; Surface Finish, Good; Standard grade
|
| Reny™ 1022H | Afrika und Mittlerer Osten |
GF-reinforced; Surface Finish, Good; Standard grade
|
| Reny™ 1022HS | Afrika und Mittlerer Osten |
GF-reinforced; Surface Finish, Good; Standard grade
|
| Reny™ 1025 | Afrika und Mittlerer Osten |
GF-reinforced; Toughness, Good
|
| Reny™ 1027HU | Afrika und Mittlerer Osten |
GF-reinforced; Weather Resistant; HB equivalent per in-house testing
|
| Reny™ 1032H | Afrika und Mittlerer Osten |
GF-reinforced, Standard grade
|
| Reny™ 1071 | Afrika und Mittlerer Osten |
GF-reinforced; Thick Parts; HB equivalent per in-house testing
|
| Reny™ 1313H | Afrika und Mittlerer Osten |
GF-reinforced; Rigidity, High; Impact Resistance, High
|
| Reny™ 1322 | Afrika und Mittlerer Osten |
GF-reinforced; Rigidity, High; Impact Resistance, High
|
| Reny™ 1371 | Afrika und Mittlerer Osten |
GF-reinforced; Rigidity, High; Impact Resistance, High
|
| Reny™ 1501AH | Afrika und Mittlerer Osten |
GF-reinforced; V-0
|
| Reny™ 1507 | Afrika und Mittlerer Osten |
GF-reinforced; V-0 Halogen content, none
|
| Reny™ 1521AH | Afrika und Mittlerer Osten |
GF-reinforced; V-0
|
| Reny™ 1527 | Afrika und Mittlerer Osten |
GF-reinforced; None-Halogen V-0
|
| Reny™ 1722F | Afrika und Mittlerer Osten |
GF-reinforced; Paintable; Rigidity, High
|
| Reny™ 2041 | Afrika und Mittlerer Osten |
GF/Mineral-reinforced, Standard grade
|
| Reny™ 2502AH | Afrika und Mittlerer Osten |
GF/Mineral-reinforced; V-0; Warpage, Low
|
| Reny™ 2505 | Afrika und Mittlerer Osten |
GF/Mineral-reinforced; V-0; Warpage, Low
|
| Reny™ 2620 | Afrika und Mittlerer Osten |
GF-reinforced; Warpage, Low; Rigidity, High
|
| Reny™ 2686 | Afrika und Mittlerer Osten |
GF-reinforced; Warpage, Low; Rigidity, High
|
| Reny™ 4001 | Afrika und Mittlerer Osten |
GF-reinforced; Electrically Conductive; Rigidity, High
|
| Reny™ 4011 | Afrika und Mittlerer Osten |
GF-reinforced; Electrically Conductive; Rigidity, High
|
| Reny™ 4501 | Afrika und Mittlerer Osten |
GF-reinforced; Electrically Conductive; V-0 ; Rigidity, High
|
| Reny™ 4511 | Afrika und Mittlerer Osten |
GF-reinforced; Electrically Conductive; V-0; Rigidity, High
|
| Reny™ C-36 | Afrika und Mittlerer Osten |
Carbon Fiber-reinforced; Rigidity, High
|
| Reny™ C-56 | Afrika und Mittlerer Osten |
Carbon Fiber-reinforced; Hardness, Ultra high
|
| Reny™ N-252A | Afrika und Mittlerer Osten |
GF-reinforced; Damping, Anti-vibration; Rigidity, High
|
| Reny™ NXG5050 | Afrika und Mittlerer Osten |
GF-reinforced; Rigidity, High; Impact Resistance, High
|
| Reny™ NXG5050NF | Afrika und Mittlerer Osten |
GF-reinforced; None-Halogen V-0; Rigidity, High; Impact Resistance, High
|
| Reny™ PG-1050A | Afrika und Mittlerer Osten |
GF-reinforced; Rigidity, High; Impact Resistance, High; HB equivalent per in-house testing
|
| Titalon® XA00GF | Asien Pazifik |
50% GLASS FIBER REINFORCED HIGH STRENGTH LOW WATER ABSORPTION
|
1
1
