Polyamid (Nylon) by Envalior
Produkt | Verfügbarkeit | Produktbeschreibung |
---|---|---|
Stanyl® TW341-N | Afrika und Mittlerer Osten |
Heat Stabilized, Lubricated
Stanyl® TW341-N is a non-reinforced high heat polyamide that offers excellent wear & friction properties in combination with outstanding creep resistance, strength, stiffness and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow.
Design Challenge
Wear & Friction
|
Stanyl® TW363 | Afrika und Mittlerer Osten |
Heat Stabilized, Impact Modified
Stanyl® TW363 is an impact-modified high heat polyamide that offers excellent wear & friction properties in combination with outstanding creep resistance, strength, stiffness and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow.
|
Stanyl® TW371 | Afrika und Mittlerer Osten |
Heat Stabilized, Wear and Friction Modified
Stanyl® TW371 is a friction-modified high heat polyamide that offers excellent wear & friction properties in combination with outstanding creep resistance, strength, stiffness and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow.
Design Challenge
Wear & Friction
|
Stanyl® TW376 | Afrika und Mittlerer Osten |
Unreinforced, Heat Stabilized, Wear and Friction Modified
|
Stanyl® TW441 | Afrika und Mittlerer Osten |
High Viscosity, Heat Stabilized, Lubricated
Stanyl® TW441 is a non-reinforced high heat polyamide that offers excellent wear & friction properties in combination with outstanding creep resistance, strength, stiffness and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow.
Design Challenge
Wear & Friction
|
Stanyl® TW441-FC | Afrika und Mittlerer Osten |
High Viscosity, Heat Stabilized, Lubricated, Food Contact Quality
|
Tepex® dynalite 101-RG600(x)/47% | Afrika und Mittlerer Osten |
Tepex® dynalite 101-RG600(x)/47%Roving Glass - PA66 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 101-RGUD600(x)/47% | Afrika und Mittlerer Osten |
Tepex® dynalite 101-RGUD600(x)/47%Roving Glass - PA66 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 102-RG600(x)/47% | Afrika und Mittlerer Osten |
Tepex® dynalite 102-RG600(x)/47%Roving Glass - PA6 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 102-RGUD600(x)/47% | Afrika und Mittlerer Osten |
Tepex® dynalite 102-RGUD600(x)/47%Roving Glass - PA6 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 201-C200(x)/45% | Afrika und Mittlerer Osten |
Tepex® dynalite 201-C200(x)/45%3K Carbon - PA66 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 201-C200(x)/50% | Afrika und Mittlerer Osten |
Tepex® dynalite 201-C200(x)/50%3K Carbon - PA66 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 202-C200(x)/45% | Afrika und Mittlerer Osten |
Tepex® dynalite 202-C200(x)/45%3K Carbon - PA6 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 202-C200(x)/50% | Afrika und Mittlerer Osten |
Tepex® dynalite 202-C200(x)/50%3K Carbon - PA6 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 206-C200(x)/45% | Afrika und Mittlerer Osten |
Tepex® dynalite 206-C200(x)/45%3K Carbon - PA12 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 401-C200(2)-FG290(2)/45% | Afrika und Mittlerer Osten |
Tepex® dynalite 401-C200(2)-FG290(2)/45%Roving Glass - PA66 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 401-C200(2)-FG290(4)/45% | Afrika und Mittlerer Osten |
Tepex® dynalite 401-C200(2)-FG290(4)/45%Roving Glass - PA66 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 401-C200(2)-FG290(6)/45% | Afrika und Mittlerer Osten |
Tepex® dynalite 401-C200(2)-FG290(6)/45%3K Carbon - Filament Glass core - PA66 consolidated composite laminate
The datasheet is valid for this specific composition only, the characteristics of composites depend on reinforcement level and fiber orientation. Non-standard thickness may alter some or all of these properties. The data listed here are given as average product properties and should not be used to establish specification limits nor used alone as basis of design. The underlying tests were conducted at room temperature and (where possible) with 2 mm specimen thickness. For tensile and flexural tests a specimen width of 25 mm was used and is highly recommended to achieve representative results.
|
Tepex® dynalite 402-C200(2)-FG290(2)/45% | Afrika und Mittlerer Osten |
Tepex® dynalite 402-C200(2)-FG290(2)/45%3K Carbon - Filament Glass core - PA6 consolidated composite laminate
The
datasheet is valid for this specific composition only, the characteristics of
composites depend on reinforcement level and fiber orientation. Non-standard
thickness may alter some or all of these properties. The data listed here are
given as average product properties and should not be used to establish
specification limits nor used alone as basis of design. The underlying tests
were conducted at room temperature and (where possible) with 2 mm specimen
thickness. For tensile and flexural tests a specimen width of 25 mm was used
and is highly recommended to achieve representative results.
|
Udea™ Akulon® K20HC60 | Afrika und Mittlerer Osten |
60% Continuous Carbon Fiber Reinforced, Uni-Directional Tape, Heat Stabilized, Black
|
Udea™ Akulon® K20HG60 | Afrika und Mittlerer Osten |
60% Continuous Glass Fiber Reinforced, Uni-Directional Tape, Heat Stabilized, Black
|
Udea™ EcoPaXX® Q20HC60 | Afrika und Mittlerer Osten |
60% Continuous Carbon Fiber Reinforced, Uni-Directional Tape, Heat Stabilized, Black
|
Udea™ EcoPaXX® Q20HG60 | Afrika und Mittlerer Osten |
60% Continuous Glass Fiber Reinforced, Uni-Directional Tape, Heat Stabilized, Black
|